IPA 99.9%
아이피에이 99.9%
KiurLab IPA 99.9% is a high-purity isopropyl alcohol containing a minimum of 99.9% active ingredient, used in professional detailing for surface degreasing and panel preparation before coating or film application. It excels at removing polishing paste residue after paint correction, cleaning adhesive traces, and degreasing paintwork before applying protective films or ceramic coatings. The product must be diluted with distilled water at a minimum 1:1 ratio before applying to painted surfaces to avoid damage to the clearcoat.
KiurLab IPA 99.9%는 최소 99.9% 순도의 이소프로필 알코올로, 전문 디테일링에서 코팅이나 필름 시공 전 표면 탈지 및 패널 전처리에 활용됩니다. 도장 폴리싱 후 연마 잔여물 제거, 접착제 흔적 세정, 보호 필름이나 세라믹 코팅 시공 전 도장면 준비에 탁월합니다. 도장 클리어코트 손상을 방지하기 위해 증류수와 최소 1:1 비율로 희석 후 사용해야 합니다.
- Brand
- KiurLab
- Categories
- Exterior : Degreaser&Dewaxing
- Primary dilution
- 1:1
Key features
- Minimum 99.9% pure isopropyl alcohol
- Removes polishing paste residue after paint correction
- Surface preparation before film or ceramic coating application
- Removes adhesive and sticker residue
- Disinfecting and sterilising properties
- Must be diluted with distilled water before use on paint (min. 1:1)
Dilution
- Exterior : Degreaser&Dewaxing — 1:1 (1:1) (primary)
Usage
- Ensure the surface to be cleaned is cool and work in a well-ventilated area away from open flames or heat sources.
- Prepare a mixture of IPA with distilled water at a minimum 1:1 ratio before applying to painted surfaces to prevent clearcoat damage.
- Test the diluted solution on an inconspicuous area of the surface to confirm no adverse reaction.
- Apply the diluted IPA to a clean microfibre cloth.
- Gently wipe the surface to be cleaned with the moistened cloth.
- Wait until the IPA has fully evaporated from the surface before proceeding with the next step.
핵심 특징
- 최소 99.9% 순도의 이소프로필 알코올
- 도장 폴리싱 후 연마 잔여물 제거
- 필름 또는 세라믹 코팅 시공 전 표면 전처리
- 접착제 및 스티커 잔여물 제거
- 살균 및 소독 효과
- 도장면 사용 시 증류수로 최소 1:1 희석 필수
사용법
- 세정할 표면이 차가운지 확인하고 화기와 열원을 피해 통풍이 잘 되는 공간에서 작업하세요.
- 도장 클리어코트 손상 방지를 위해 도장면에 사용 전 증류수와 최소 1:1 비율로 희석하세요.
- 눈에 띄지 않는 부위에 희석액을 테스트하여 이상 반응을 확인하세요.
- 희석한 IPA를 깨끗한 마이크로파이버에 적셔주세요.
- 적신 마이크로파이버로 세정할 표면을 부드럽게 닦아내세요.
- 다음 작업 전 표면에서 IPA가 완전히 증발할 때까지 기다리세요.
Also known as: kiru, 키우랩, KiurLab IPA 99.9%, IPA, KiurLab IPA, 키우랩 아이피에이 99.9%, 키우랩 IPA