STANCE RIM COAT PROFESSIONAL
스탠스 림 코트 프로페셔널
STANCE RIM COAT PROFESSIONAL is a wheel coating containing 20% modified fluoro polysilazane, about 10% more active ingredient than the standard version, plus cross-linkers for a high-hardness film. The cured coating strongly resists brake dust, silica scales, and acidic chemicals on painted, metal, and wheel surfaces, and can be applied by spray gun without wiping or by hand.
스탠스 림 코트 프로페셔널은 변성 플루오로 폴리실라잔을 20% 함유한 휠 코팅제로, 일반 버전보다 활성 성분이 약 10% 더 많으며 고경도 피막을 위한 가교제가 포함되어 있습니다. 경화된 코팅은 도장면, 금속, 휠 표면에서 브레이크 분진, 실리카 스케일, 산성 화학물질에 강한 저항성을 보이며, 스프레이 건으로 닦아내지 않고 도포하거나 손으로 시공할 수 있습니다.
- Brand
- Kamikaze Collection
- Categories
- Exterior : Tire&Wheel Sealant, Exterior : Coating
Key features
- 20% modified fluoro polysilazane
- Higher active-ingredient concentration
- Cross-linkers for high-hardness film
- Resists brake dust and silica scales
- Resists acidic chemicals
- Spray-gun or hand application
Usage
- Thoroughly clean and prepare the surface to be treated.
- Apply a generous amount of the coating onto the included applicator, more so on the first coat.
- Spread it in straight-line strokes to build as thick a film as possible.
- When the film looks flaky or has flashed off (about 2-3 minutes), buff it away with a microfiber towel.
- Allow about 2 hours to dry, with full cure after 72 hours.
핵심 특징
- 변성 플루오로 폴리실라잔 20% 함유
- 높은 활성 성분 농도
- 고경도 피막용 가교제 포함
- 브레이크 분진과 실리카 스케일에 강함
- 산성 화학물질에 강한 저항성
- 스프레이 건 또는 손 시공 가능
사용법
- 시공할 표면을 깨끗하게 세척하고 준비합니다.
- 동봉된 어플리케이터에 코팅제를 충분히 묻히고, 첫 도포 시에는 더 넉넉히 바릅니다.
- 직선 방향으로 펴 발라 최대한 두꺼운 피막을 형성합니다.
- 피막이 하얗게 뜨거나 증발한 듯 보이면(약 2~3분 후) 마이크로파이버 타월로 닦아냅니다.
- 약 2시간 건조하며, 72시간 후 완전히 경화됩니다.
Also known as: 카미카제, kmkz, kamikaze, 카미카제 콜렉션, Kamikaze Collection STANCE RIM COAT PROFESSIONAL, Kamikaze STANCE RIM COAT PROFESSIONAL, KMKZ STANCE RIM COAT PROFESSIONAL, 가미카제 스탠스 림 코트 프로페셔널
한국어로 보기
Sources