Jax Wax Black Trim Renew Dilution Ratios & User Guide

Jax Wax Black Trim Renew dilution ratio and pH specification chart

블랙 트림 리뉴

Jax Wax Black Trim Renew — Exterior : Tire&Wheel Sealant. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/jax-wax/black-trim-renew

Jax Wax 블랙 트림 리뉴 — Exterior : Tire&Wheel Sealant. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/jax-wax/black-trim-renew

Black Trim Renew is a professional-grade trim restorer that penetrates oxidized plastic and rubber to revive the original deep black color from within, rather than simply coating the surface. It dries to a natural matte finish with no greasy residue or artificial wet look, and provides UV protection to prevent future fading and browning.

블랙 트림 리뉴는 표면에 코팅을 얹는 방식이 아니라 산화된 플라스틱과 고무 소재에 침투하여 본래의 진한 검정색을 내부에서부터 되살리는 전문가용 트림 복원제입니다. 기름기 없는 자연스러운 무광 마감으로 건조되며, UV 보호 기능으로 향후 탈색과 산화를 방지합니다.

Brand
Jax Wax
Categories
Exterior : Tire&Wheel Sealant
Primary dilution
RTU
Last updated
2026-06-19

Key features

Dilution

UseDilutionRatio
Exterior : Tire&Wheel Sealant (primary)RTU1:0

Usage

  1. Start with clean, fully dry trim; wipe down with isopropyl alcohol to remove any old dressings, silicones, or wax residue.
  2. Apply a small amount of Black Trim Renew to a foam applicator or microfiber cloth.
  3. Work the product into the trim in straight overlapping passes, then finish with light circular motions to ensure full coverage.
  4. Allow to dwell for one to two minutes, then wipe away excess with a clean dry microfiber towel.
  5. Avoid contact with painted or glass surfaces; if product gets on paint, wipe off immediately.
  6. Allow the trim to cure for at least one hour before water exposure; avoid washing the treated area for the first 24 hours.

핵심 특징

  • 산화된 플라스틱과 고무에 침투해 원래의 검정색 복원
  • 기름기 없는 자연스러운 무광 마감으로 건조
  • 수개월 지속되는 높은 내구성
  • 향후 탈색 및 산화를 방지하는 UV 보호
  • 범퍼, 미러 하우징, 카울 패널, 펜더 플레어, 고무 몰딩에 적용 가능
  • 미국 생산

사용법

  1. 트림을 깨끗하게 세정하고 완전히 건조시킨 뒤, 이소프로필 알코올로 닦아 기존 드레싱, 실리콘, 왁스 잔여물을 제거합니다.
  2. 폼 어플리케이터 또는 마이크로파이버 천에 블랙 트림 리뉴를 소량 묻힙니다.
  3. 직선으로 겹쳐가며 제품을 트림에 바른 뒤 가볍게 원형으로 문질러 전체 면적을 고르게 도포합니다.
  4. 1~2분간 방치한 후 깨끗하고 건조한 마이크로파이버 타월로 잔여물을 닦아냅니다.
  5. 도장면이나 유리에 닿지 않도록 주의하고, 도장면에 묻었다면 즉시 닦아냅니다.
  6. 시공 후 최소 1시간 동안 물에 노출되지 않도록 하고, 처음 24시간 이내에는 세차를 피합니다.

Also known as: 잭스 왁스, 잭스왁스, 잭스, jax, jaxwax, Jax Wax Black Trim Renew, Jax Black Trim Renew, JW Black Trim Renew, BTR, Jax Wax BTR, Jax BTR, JW BTR, 잭스왁스 블랙 트림 리뉴, 잭스왁스 BTR

한국어로 보기

Sources

Related products

More from Jax Wax

More Tire&Wheel Sealant products

Explore more