C1 Crystal Lacquer
C1 크리스탈 라커
C1 Crystal Lacquer is a ceramic coating that bonds with the clear coat to become the working surface of the paint, with durability of up to about five years. The crystalline film helps resist swirls from regular hand washing while shielding clear coat against bird droppings, tree sap, and UV. Because it cures via reaction with airborne oxygen, it is compatible with matte, satin, single-stage, and very soft clearcoat finishes.
C1 크리스탈 라커는 클리어코트와 결합해 도장의 기능적 표면 역할을 하는 세라믹 코팅으로, 최대 약 5년의 내구성을 제공합니다. 단단한 결정질 막이 손세차에서 발생하는 스월과 미세 손상에 강하고 새 배설물, 수액, 자외선으로부터 클리어코트를 보호합니다. 공기 중 산소와 반응해 경화되기 때문에 무광·새틴·싱글스테이지·연한 클리어코트 같은 특수 도장에도 사용할 수 있습니다.
- Brand
- GTECHNIQ
- Categories
- Exterior : Coating
Key features
- Up to about five years of durability
- Crystalline, clear finish
- Bonds to clear coat
- Compatible with matte, satin, and single-stage paint
Usage
- Apply only at 5 degrees Celsius or above, indoors and out of direct sunlight.
- Wear the supplied gloves.
- Soak the application pad with several drops of product.
- Cap the bottle and set it aside to avoid warming it in your hand and triggering early curing.
- Spread the product over a small panel or a large panel at a time.
- Remove residue immediately with an MF1 ZeroR Microfibre Buff Cloth.
- Rotate at least two MF1 cloths so C1 does not cure into the fibres.
- Change the application pad every 3 to 4 applications.
- If residue cures fully, polish that area and reapply C1.
- When done, soak the microfibres in water and wash them quickly to prevent crystallisation.
- Keep the vehicle indoors for 12 hours before exposure to the elements.
- If layering EXO or C2 Liquid Crystal over C1, wait at least 4 hours, store cool and dry, and use within 3 months of opening.
핵심 특징
- 최대 약 5년 지속력
- 결정질 투명 마감
- 클리어코트와 결합
- 무광·새틴·싱글 스테이지 도장에도 적합
사용법
- 5°C 이상 실내에서 직사광선을 피해 도포합니다.
- 동봉된 장갑을 착용합니다.
- 도포 패드에 제품을 몇 방울 적십니다.
- 뚜껑을 닫아 한쪽에 두어 손의 온기로 인한 조기 경화를 방지합니다.
- 작은 패널 또는 큰 패널 단위로 한 번에 펴 바릅니다.
- MF1 ZeroR 마이크로파이버 버프 천으로 잔여물을 즉시 제거합니다.
- 최소 두 장의 MF1 천을 번갈아 사용하여 천 안에서 C1이 경화되지 않도록 합니다.
- 도포 3~4회마다 어플리케이터 패드를 교체합니다.
- 잔여물이 완전히 경화되었다면 해당 부위를 폴리싱하고 C1을 재도포합니다.
- 작업 후 즉시 천을 물에 담가 빠르게 세척해 결정화를 방지합니다.
- 외부 노출 전 차량을 12시간 동안 실내에 둡니다.
- C1 위에 EXO 또는 C2 리퀴드 크리스탈을 도포할 경우 최소 4시간 후 진행하고, 서늘하고 건조한 곳에 보관하며 개봉 후 3개월 이내에 사용합니다.