Trinity Graphene Coating
트리니티 그래핀 코팅
good · 굿 · 굿스텁 · 굿스터프 · GOOD STUFF Trinity Graphene Coating · Good Stuff Trinity Graphene Coating · GS Trinity Graphene Coating · TGC · GOOD STUFF TGC · Good Stuff TGC · GS TGC · 굿 스터프 트리니티 그래핀 코팅 · 굿 스터프 TGC
A professional-grade protective coating that adds deep gloss and strong water repellency to paint, PPF, carbon fiber, and plastics. A single system combines UV resistance, micro-scratch resistance, and chemical durability. It is applied section by section and can last up to around three years.
도장과 PPF, 카본 파이버, 플라스틱에 깊은 광택과 강한 발수성을 더하는 전문가용 보호 코팅입니다. 자외선 차단, 미세 스크래치 저항, 화학물질 내성을 하나의 시스템에 담았습니다. 구획별로 나눠 도포하며 약 3년까지 지속될 수 있습니다.
- Brand
- GOOD STUFF
- Categories
- Exterior : Coating
Key features
- Lasts up to around 3 years
- Strong water repellency
- UV resistance
- Micro-scratch resistance
- Apply in up to 2 layers
- For paint, PPF, plastics, carbon fiber, and metal
Usage
- Wash, decontaminate, and fully prepare the surface beforehand.
- Degrease the paint with an IPA-based solution.
- Shake the bottle and apply 8-10 drops to a microfiber or foam applicator.
- Work in roughly 50 x 50 cm sections using a cross-hatch pattern.
- Wait 30-120 seconds until the surface looks satin-like.
- Level with one microfiber towel, then finish with a second clean towel.
- For a second layer, apply it at least 1 hour after the first.
- Keep the vehicle dry for at least 8 hours after application.
- Allow 7 days of curing before washing or using other products.
핵심 특징
- 약 3년까지 지속
- 강한 발수 효과
- 자외선 차단
- 미세 스크래치 저항
- 최대 2겹 도포
- 도장·PPF·플라스틱·카본·금속용
사용법
- 도포 전 차량을 세차하고 오염물을 제거해 표면을 완전히 준비합니다.
- IPA 기반 용액으로 도장 면을 탈지합니다.
- 용기를 흔든 뒤 마이크로파이버 또는 폼 도포패드에 8~10방울을 덜어냅니다.
- 약 50 x 50 cm 구획을 격자 패턴으로 도포합니다.
- 표면이 새틴 질감이 될 때까지 30~120초 기다립니다.
- 마이크로파이버 타월 한 장으로 레벨링한 뒤, 깨끗한 두 번째 타월로 마무리합니다.
- 2겹 도포 시 첫 도포 후 최소 1시간 뒤에 진행합니다.
- 도포 후 최소 8시간 동안 차량을 물에 닿지 않게 합니다.
- 세차나 다른 제품 사용 전 7일간 경화시킵니다.