/ZERO: Iron Oxide V3
/ZERO: 아이언 옥사이드 V3
Iron Oxide V3 is a potent ferrous fallout remover enriched with the deep-cleansing surfactants from Decon Shampoo. Formulated to dissolve iron oxide particles and other inorganic contaminants commonly found on paintwork and alloy wheels, it reacts on contact with rust and brake dust, turning a deep purple colour to indicate the reaction is taking place. Compared to V2, V3 has a higher concentration of TGA for stronger iron oxide removal and a quicker, longer-lasting reaction.
아이언 옥사이드 V3는 도장면과 알로이 휠에 침착된 철분 입자 및 비유기성 오염물을 분해하는 강력한 폴아웃 리무버입니다. 디콘 샴푸의 세정 계면활성제를 함유해 세정력이 강화되었으며, 철분·브레이크 더스트와 접촉 시 보라색으로 변해 반응이 진행됨을 시각적으로 확인할 수 있습니다. V3는 V2 대비 TGA 농도가 높아 더 강력하고 빠른 반응을 보입니다.
- Brand
- Garage Therapy
- Categories
- Exterior : Remover
- pH
- neutral
Key features
- Ferrous fallout and iron oxide remover
- Enriched with deep-cleansing surfactants
- Colour-change indicator turns purple on contact with iron particles
- Higher TGA concentration than V2
- Stronger iron oxide removal versus V2
- Quicker and longer-lasting reaction versus V2
Usage
- Shake well before use. Wear gloves and protective eyewear and work in a well-ventilated area. Do not use on hot panels or in direct sunlight.
- Spray onto painted surfaces, ensuring complete and even coverage.
- Allow to dwell for about 4–5 minutes. Iron particles, if present, will dissolve and the product will turn deep purple. Do not let the product dry on the surface.
- Rinse treated areas thoroughly to remove all residue.
- Repeat if necessary.
- For best results, pressure-wash the vehicle first and wash with Decon Shampoo before applying.
- For heavily contaminated painted areas, gently agitate the product with a microfibre towel.
- For heavily contaminated wheels, agitate with a soft-bristle brush or wheel woolie.
핵심 특징
- 철분 폴아웃·아이언 옥사이드 리무버
- 디콘 샴푸 계열 세정 계면활성제 강화
- 철분 접촉 시 보라색 변색 반응 표시
- V2 대비 높은 TGA 농도
- V2 대비 강력한 철분 제거력
- V2 대비 빠르고 오래 지속되는 반응
사용법
- 사용 전 잘 흔들고 장갑·보안경을 착용한 뒤 환기가 잘 되는 곳에서 작업합니다. 뜨거운 패널이나 직사광선 아래에서는 사용하지 않습니다.
- 도장면에 빠짐없이 고르게 분사합니다.
- 약 4~5분간 반응시킵니다. 철분 오염물이 있으면 보라색으로 변하며 분해됩니다. 제품이 마르지 않도록 주의합니다.
- 처리 부위를 충분히 헹궈 잔여물을 완전히 제거합니다.
- 필요 시 반복합니다.
- 먼저 고압수로 차량을 세척하고 디콘 샴푸로 세차한 뒤 사용하면 효과가 더 좋습니다.
- 오염이 심한 도장 부위는 마이크로파이버 타올로 가볍게 문질러 줍니다.
- 오염이 심한 휠은 소프트 브러시나 휠 울리로 문질러 줍니다.