Ganbass REBOOT Dilution Ratios & User Guide

Ganbass REBOOT dilution ratio and pH specification chart

리부트

Ganbass REBOOT — Exterior : Remover, acid pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ganbass/reboot

Ganbass 리부트 — Exterior : Remover, pH acid. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ganbass/reboot

REBOOT is an acidic scale, water-spot, and rain-stain remover designed for dry-method application to chemically dissolve mineral deposits, ion deposits, and silica scale that accumulate on coated or bare paint without causing paint or coating damage. Unlike abrasive cleaners, it works through a purely chemical reaction, lifting scale without scratching the surface. Regular use is recommended to prevent mineral buildup from causing irreversible paint depression.

REBOOT는 건식 시공 전용의 산성 스케일·물자국·비 얼룩 제거제로, 코팅막이나 도장면에 쌓인 미네랄 침전물, 이온 디포짓, 실리카 스케일을 화학적으로 용해하여 제거합니다. 연마제가 포함된 클리너와 달리 순수한 화학 반응으로 작용하여 도장면에 스크래치 없이 스케일을 제거합니다. 정기적으로 사용하면 미네랄 침착으로 인한 돌이킬 수 없는 도장 함몰을 예방할 수 있습니다.

Brand
Ganbass
Categories
Exterior : Remover
Primary dilution
RTU
pH
acid
Last updated
2026-06-20

Key features

  • Acidic formula dissolves silica scale, ion deposits, and rain stains
  • Dry-method application only (乾式専用)
  • Non-abrasive chemical action — no scratch risk
  • Gentle on paint coating while removing surface contaminants
  • Also removes dark buildup around emblems and panel edges
  • Prevents irreversible paint depression from long-term mineral accumulation

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Wash the vehicle and wipe the surface as dry as possible; residual moisture weakens the product's effectiveness.
  2. Test on an inconspicuous area first to confirm safe compatibility with the paint.
  3. Apply an appropriate amount to a dry cloth, spread onto approximately a 30 cm × 30 cm section of the paint surface at a time.
  4. Within a few seconds, scale will rise visibly as a white residue; wipe it away with a separate clean cloth.
  5. Repeat application and wiping as needed for stubborn deposits; if scale cannot be removed, paint depression may be the cause and polishing will be required.
  6. Rinse the treated area thoroughly with water and finish with a clean dry cloth wipe.

핵심 특징

  • 산성 배합으로 실리카 스케일, 이온 디포짓, 비 얼룩 용해 제거
  • 건식 시공 전용 (습식 불가)
  • 비연마 화학 작용 — 스크래치 위험 없음
  • 코팅막에 최소한의 손상을 주면서 표면 오염물 제거
  • 엠블럼 주변 및 패널 가장자리의 검은 얼룩 제거
  • 장기간 미네랄 침착으로 인한 도장 함몰 예방

사용법

  1. 세차 후 도장면을 최대한 건조하게 닦아 내세요. 수분이 남아 있으면 효과가 약해집니다.
  2. 눈에 띄지 않는 부위에서 먼저 도장과의 적합성을 확인하세요.
  3. 건조한 클로스에 적량을 묻혀 한 번에 약 30cm × 30cm 범위의 도장면에 펴 바르세요.
  4. 수초 내에 스케일이 흰 잔여물로 떠오르면 별도의 깨끗한 클로스로 닦아 내세요.
  5. 완고한 오염은 도포와 닦기를 반복하세요. 제거되지 않으면 도장 함몰 가능성이 있으며 연마 작업이 필요합니다.
  6. 시공 부위를 물로 충분히 헹구고 깨끗한 건조 클로스로 마무리 닦기를 하세요.

Also known as: 간바스, ganbas, Ganbass REBOOT, 간바스 리부트, REBOOT雨染みスケール分解除去剤, 雨染み分解液, 간바스 REBOOT, REBOOT1000ml

한국어로 보기

Sources

  • Ganbass official product page

Related products

More from Ganbass

  • Tire Wax Applicator Sponge
  • Glass cleaner
  • Detail-Cloth-Pro (Thick) 3pc Set
  • Nitrile Glove
  • Wheel & Wheel House Cleaner Alkali Type
  • Pressurized Mist Spray Bottle

More Remover products

  • 3D Car Care Eraser Gel
  • CarPro Bug Out
  • Meguiar's Water Spot Remover
  • Dr. Beasley's Concrete Remover
  • Innova Car D1 Iron
  • CarCandy Remove-It

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)