Fireball Glass Shield Dilution Ratios & User Guide

Fireball Glass Shield dilution ratio and pH specification chart

글라스 쉴드

Fireball Glass Shield — Exterior : Glass Sealant. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/fireball/glass-shield

Fireball 글라스 쉴드 — Exterior : Glass Sealant. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/fireball/glass-shield

Glass Shield is a premium ceramic glass coating that vastly improves driving visibility in wet weather, reducing visual impairment from rain, sleet, and snow with a durable hydrophobic layer that can last over a year.

글래스 쉴드는 우천 시 운전 시야를 크게 개선해 주는 프리미엄 세라믹 글라스 코팅입니다. 비, 진눈깨비, 눈으로 인한 시야 방해를 줄여주며 1년 이상 지속되는 강력한 발수 보호막을 형성합니다.

Brand
Fireball
Categories
Exterior : Glass Sealant
Primary dilution
RTU
Last updated
2026-07-11

Key features

Dilution

UseDilutionRatio
Exterior : Glass Sealant (primary)RTU1:0

Usage

  1. Thoroughly clean the glass surface with a quality glass cleaner. Ensure it is dry and free from oils and contaminants.
  2. Wipe the surface with an IPA solution (such as Fireball Reborn) to remove residual oils for better bonding.
  3. Shake the bottle well, then apply a small amount of Glass Shield to a clean microfibre applicator or sponge.
  4. Spread the product evenly across the glass in straight lines or circular motions, ensuring full coverage.
  5. Allow to cure for 10–15 minutes until the product flashes (begins to dry and haze), then buff off the excess with a clean, dry microfibre towel.
  6. Avoid contact with water for at least 2–3 hours after application.
  7. For best results, allow the coating to cure for 24 hours in a dry, sheltered environment before exposure to rain or washing.

핵심 특징

  • 유리 전용 발수 코팅제
  • 강한 물맺힘과 물흐름으로 시야 확보
  • 블럭 도포 후 닦아내는 간편 시공
  • 오래 지속되는 발수 효과

사용법

  1. 고품질 유리 클리너로 유리 표면을 깨끗이 닦고 완전히 건조하여 유분과 오염이 없는 상태로 준비하세요.
  2. 잔류 유분 제거 및 밀착력 향상을 위해 IPA 용액(파이어볼 리본 등)으로 표면을 닦아내세요.
  3. 병을 잘 흔든 후 깨끗한 마이크로파이버 어플리케이터 또는 스펀지에 글라스 쉴드를 소량 묻히세요.
  4. 직선 또는 원형 동작으로 유리 전체를 고르게 도포하세요.
  5. 10~15분간 경화시켜 제품이 흐려지기 시작하면 깨끗하고 건조한 마이크로파이버 타올로 잔여물을 닦아내세요.
  6. 도포 후 최소 2~3시간 동안 물이 닿지 않도록 하세요.
  7. 최상의 결과를 위해 우천 노출이나 세차 전 건조하고 그늘진 환경에서 24시간 경화하세요.

Also known as: 파이어볼, fire, Fireball Glass Shield, GS, 글래스 쉴드, 파이어볼 글래스 쉴드

한국어로 보기

Sources

Related products

More from Fireball

More Glass Sealant products

Explore more