Angel Tears
엔젤 티얼스
파이어볼 · fire · Fireball Angel Tears · AT · 엔젤 티어스 · 파이어볼 엔젤 티어스
Angel Tears is an innovative ceramic coating designed to make installation easy for both professionals and DIY enthusiasts. It combines extreme water-repellency with ease of use, leaving a soft, smooth surface with incredible shine.
엔젤 티얼스는 전문가와 DIY 사용자 모두 손쉽게 시공할 수 있도록 설계된 혁신적인 세라믹 코팅입니다. 강력한 발수성과 편리한 시공성을 겸비하여 부드럽고 매끄러운 표면과 뛰어난 광택을 선사합니다.
- Brand
- Fireball
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Shake well.
- Wash and fully prepare the surface with Reborn.
- Tuck a microfibre suede cloth into the Fireball applicator block slits. Apply a few drops of Angel Tears onto the suede.
- Apply coating in smooth, even lines overlapping each pass by 20%. If layers appear thin, carefully add more product. Set a timer for 3–7 minutes.
- After the coating adheres, wipe off the excess with a clean microfibre towel. Note the timing for future applications.
- Apply an optional second coat at least 2 hours after the first.
- Keep the vehicle away from the elements for 48 hours.
사용법
- 병을 충분히 흔들어 주세요.
- 차량을 세차하고 리본으로 표면을 철저히 준비하세요.
- 마이크로파이버 스웨이드를 파이어볼 어플리케이터 블록 슬릿에 끼우고 스웨이드에 코팅제를 몇 방울 묻히세요.
- 20% 겹치도록 부드럽고 균일한 선으로 코팅을 도포하세요. 층이 얇아 보이면 소량 추가하세요. 타이머를 3~7분으로 설정하세요.
- 코팅이 표면에 달라붙으면 깨끗한 마이크로파이버 타올로 잔여물을 닦아내세요. 다음 시공을 위해 적절한 시간을 메모해두세요.
- 원하는 경우 첫 번째 도포 후 최소 2시간 후에 2차 도포를 진행하세요.
- 도포 후 48시간 동안 외부 환경으로부터 차량을 보호하세요.