Fictech Butter Bubble 301 Dilution Ratios & User Guide

Fictech Butter Bubble 301 dilution ratio and pH specification chart

버터 버블 301

Fictech Butter Bubble 301 — Exterior : Polishes, acid pH, base dilution 1:20~1:40. At 1:20, mix about 50 ml of Fictech Butter Bubble 301 per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/fictech/butter-bubble-301

Fictech 버터 버블 301 — Exterior : Polishes, pH acid, 기본 희석 1:20~1:40. 1:20 기준 물 1L당 Fictech 버터 버블 301 약 50ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/fictech/butter-bubble-301

Butter Bubble 301 is a concentrated lubricating shampoo designed to be used together with clay bars or 2-in-1 decontamination gloves. It combines cleaning action with lubrication to reduce the risk of micro-scratches while lifting embedded contaminants, preparing the surface for polishing.

버터 버블 301은 클레이바 또는 2-in-1 디컨타미네이션 장갑과 함께 사용하도록 만들어진 고농축 윤활 샴푸이다. 세정력과 윤활력을 동시에 제공하여 미세 스크래치 위험을 줄이면서 표면에 박힌 오염물을 제거하고, 폴리싱 전 표면을 준비해준다.

Brand
Fictech
Categories
Exterior : Polishes
Primary dilution
1:20~1:40
pH
acid (5)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-06

Key features

Dilution

UseDilutionRatio
Exterior : Polishes (primary)1:20~1:401:20-40

Usage

  1. Dilute 75-150 ml of product per 3 liters of water depending on the level of contamination.
  2. Apply the diluted solution using a hand-pump or pressure sprayer for even coverage, or use a wash bucket fitted with a grit guard.
  3. Glide a clay bar or 2-in-1 decontamination glove of suitable hardness over the sprayed surface in straight-line motions.
  4. Rinse with clean water, preferably at high pressure, to remove residue.
  5. Dry with a clean microfiber, then proceed to polishing to reveal shine and remove remaining defects.

핵심 특징

  • 고농축 2-in-1 세정 윤활 샴푸
  • 클레이바와 도장면 사이 마찰 감소
  • 고른 분산으로 균일한 디컨타미네이션
  • 사용 후 오염 방지 성분
  • 도장면, 클리어코트, 세라믹 코팅에 안전
  • 라벤더 향

사용법

  1. 오염도에 따라 물 3리터에 제품 75~150ml를 희석한다.
  2. 손 펌프 또는 압축 분무기로 희석액을 고르게 분사하거나, 그릿가드를 장착한 세차 버킷에 준비한다.
  3. 적합한 강도의 클레이바나 2-in-1 디컨타미네이션 장갑을 분사된 표면 위에서 일직선으로 문지른다.
  4. 깨끗한 물로, 가능하면 고압으로 헹궈 잔여물을 제거한다.
  5. 마이크로파이버로 건조한 뒤 폴리싱 단계로 넘어가 광택을 내고 남은 결점을 제거한다.

Also known as: 피크테크, fic, Fictech Butter Bubble 301, 픽텍 버터 버블 301, 301

한국어로 보기

Sources

Related products

More from Fictech

More Polishes products

Explore more