Fictech APC 150 Dilution Ratios & User Guide

Fictech APC 150 dilution ratio and pH specification chart

Fictech APC 150 — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:4~1:50. At 1:4, mix about 250 ml of Fictech APC 150 per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/fictech/apc-150

Fictech APC 150 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:4~1:50. 1:4 기준 물 1L당 Fictech APC 150 약 250ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/fictech/apc-150

APC 150 is an all-purpose cleaner that lifts grease, embedded grime, and residue from a wide range of surfaces. It stays effective in hard water even after dilution and uses an unscented formula suited to interiors, exteriors, fabrics, and plastics.

APC 150은 다양한 표면에서 기름때와 찌든 오염물, 잔여물을 효과적으로 제거하는 다목적 세정제입니다. 센물에서도 희석 후 세정력을 유지하며, 무향 포뮬러로 실내외, 원단, 플라스틱까지 폭넓게 사용할 수 있습니다.

Brand
Fictech
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:4~1:50
pH
alkali (13)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-10

Key features

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:4~1:501:4-50

Usage

  1. Dilute according to soil level: 1:50~1:20 for light soiling, 1:20~1:10 for medium soiling, or 1:10~1:4 for heavy soiling.
  2. Apply with a manual or compressed-air sprayer, agitating with a brush or microfiber suited to the surface.
  3. Let the product dwell for 2 to 5 minutes without allowing it to dry on the surface.
  4. Agitate stubborn residue with a brush, detailing brush, or microfiber.
  5. Rinse thoroughly with clean water to remove all residue.
  6. For plastics and glass, wipe with a clean microfiber without rinsing if preferred.

핵심 특징

  • 기름때와 찌든 오염물 제거
  • 센물에서도 안정적인 세정력
  • 무향 포뮬러
  • 실내외, 원단, 플라스틱 표면에 사용 가능
  • 석회질 방지 킬레이트 첨가제
  • 거품 안정화 유화제

사용법

  1. 오염 정도에 따라 희석: 가벼운 오염은 1:50~1:20, 중간 오염은 1:20~1:10, 심한 오염은 1:10~1:4로 희석합니다.
  2. 수동 또는 압축공기 분무기로 도포한 뒤 표면에 맞는 브러시나 마이크로파이버로 문지릅니다.
  3. 표면에서 마르지 않도록 주의하며 2~5분간 방치합니다.
  4. 심한 잔여물은 브러시나 디테일링 붓, 마이크로파이버로 문질러 제거합니다.
  5. 깨끗한 물로 충분히 헹궈 잔여물을 제거합니다.
  6. 플라스틱이나 유리 표면은 헹구지 않고 깨끗한 마이크로파이버로 닦아도 됩니다.

Also known as: 피크테크, fic, Fictech APC 150, APC-150, 픽테크 APC 150, APC 150 클리너

한국어로 보기

Sources

Related products

More from Fictech

More Pre-washing (Pretreatment) products

Explore more