EWOCAR ALK PreWash Dilution Ratios & User Guide

EWOCAR ALK PreWash dilution ratio and pH specification chart

알크 프리워시

EWOCAR ALK PreWash — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:20~1:100. At 1:20, mix about 50 ml of EWOCAR ALK PreWash per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/ewocar/alk-prewash

EWOCAR 알크 프리워시 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:20~1:100. 1:20 기준 물 1L당 EWOCAR 알크 프리워시 약 50ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/ewocar/alk-prewash

A powerful alkaline traffic film remover (TFR) formulated as a high-foam pre-wash for professional detailers and demanding enthusiasts. Its foam-clinging alkaline formula breaks down mud, road film, insects, grease, and brake dust before contact washing, helping to minimize swirl marks. Effective on daily drivers, commercial vehicles, off-road cars, and heavily soiled surfaces.

강력한 알칼리성 도로 오염막 제거제(TFR)로 전문 디테일러와 차량 관리 열성 사용자를 위해 설계된 고발포 전처리 세제입니다. 알칼리성 거품 포뮬러가 접촉 세차 전 진흙, 도로 오염막, 벌레, 기름기, 브레이크 분진을 분해하여 미세 스크래치 발생을 최소화합니다. 일반 차량, 상업용 차량, 오프로드 차량, 심하게 오염된 표면에 효과적입니다.

Brand
EWOCAR
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:20~1:100
pH
alkali (11.7)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:20~1:1001:20-100

Usage

  1. Fill the foam lance bottle with water and add 10–50 ml of ALK PreWash per 1 L, depending on contamination level.
  2. Apply foam generously to the entire vehicle surface from bottom to top.
  3. Allow the foam to dwell on the surface for 2–5 minutes without drying.
  4. Rinse thoroughly with water before proceeding to contact washing.

핵심 특징

  • 알칼리성 도로 오염막 제거제(TFR)
  • 고발포 포뮬러가 표면에 밀착되어 충분한 반응 시간 확보
  • 접촉 세차 전 오염물 제거로 미세 스크래치 감소
  • 진흙, 도로 오염막, 벌레, 기름기, 브레이크 분진에 효과적
  • 일반, 상업용, 오프로드 차량에 적합
  • 도막, 크롬, 고무, 플라스틱에 안전

사용법

  1. 폼 랜스 병에 물을 채우고 오염 정도에 따라 물 1L당 ALK 프리워시 10~50ml를 넣습니다.
  2. 차량 하단부터 상단까지 전체 표면에 거품을 충분히 도포합니다.
  3. 건조되지 않도록 거품을 2~5분간 표면에 방치합니다.
  4. 접촉 세차를 시작하기 전에 물로 충분히 헹굽니다.

Also known as: 이우카, EWO, 이우, Ewocar ALK PreWash, ALK, Ewocar ALK, 이워카 알크 프리워시

한국어로 보기

Sources

Related products

More from EWOCAR

More Pre-washing (Pretreatment) products

Explore more