Matte Decon
매트 디콘
Matte Decon is a chemical iron decontaminant developed for matte and satin paint finishes, as well as compatible matte vinyl and PPF surfaces where traditional clay use would damage the texture. It reacts with and dissolves embedded iron particles—including brake dust and industrial fallout—pulling them safely out of the finish to prevent long-term oxidation and rust damage. The fast-acting formula also prepares surfaces for nanocoating application by ensuring deep contamination is fully cleared before the coating is applied.
매트 디콘은 클레이 사용이 표면을 손상시킬 수 있는 매트 및 새틴 도장, 매트 비닐, PPF 전용으로 개발된 화학 철분 오염 제거제입니다. 브레이크 분진과 산업 낙진을 포함한 도장 내 철분 입자와 반응·분해하여 장기적인 산화 및 녹 손상을 예방합니다. 빠른 작용 포뮬러로 나노코팅 도포 전 심층 오염물을 완전히 제거하여 코팅 작업을 준비하는 데 효과적입니다.
- Brand
- Dr. Beasley's
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- pH
- neutral (7)
Key features
- Chemical iron removal without clay bar
- Safe for matte and satin paint finishes
- Compatible with matte vinyl and PPF
- Removes brake dust and industrial fallout
- Prevents paint oxidation from embedded iron
- Fast-acting formula
- Prepares surface for ceramic coating application
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Spray Matte Decon directly onto the contaminated matte or satin panel.
- Allow to dwell for 1–2 minutes while the formula reacts with and dissolves embedded iron particles; do not allow to dry.
- Rinse the panel thoroughly with a strong spray of water to remove the decontaminant along with the dissolved contamination.
핵심 특징
- 클레이 바 없이 화학적 철분 제거
- 매트 및 새틴 도장에 안전
- 매트 비닐 및 PPF 호환
- 브레이크 분진 및 산업 낙진 제거
- 매립된 철분으로 인한 도장 산화 방지
- 빠른 작용 포뮬러
- 세라믹 코팅 도포 전 표면 준비
사용법
- 오염된 매트 또는 새틴 패널에 매트 디콘을 직접 스프레이합니다.
- 포뮬러가 철분 입자와 반응하여 분해되도록 1~2분간 표면에 반응시키며, 건조되지 않도록 주의합니다.
- 강한 물 분사로 패널을 충분히 헹궈 오염 제거제와 분해된 오염물을 씻어냅니다.
Also known as: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's Matte Decon, MD, Dr. Beasley's MD, 닥터 비즐리 매트 디콘, 닥터 비즐리 MD
한국어로 보기
Sources