Rinse AID
린스 에이드
A concentrated rinse aid that breaks the water film on paint to speed up drying after a wash and leaves a slick, glossy layer behind. It is rated safe on unprotected paint as well as ceramic coatings, waxes, sealants and PPF, and dilutes from 1:200 for spray-on use up to 1:1 as a drying aid quick detailer.
세차 후 도장면에 남은 물막을 끊어 건조 시간을 줄이고, 매끄러운 광택층을 남기는 농축형 린스 에이드입니다. 무코팅 도장은 물론 세라믹 코팅·왁스·실란트·PPF에 표기상 안전하며, 스프레이 1:200부터 드라잉 에이드 퀵 디테일러용 1:1까지 폭넓게 희석해 사용할 수 있습니다.
- Brand
- Cleantle
- Categories
- Exterior : Rinseless&Waterless, Exterior : Foam, Exterior : Quick Detailer
- Primary dilution
- 1:200
Key features
- Breaks the water film for faster drying
- Leaves a glossy, slick surface
- Helps reduce water spots and streaks
- Safe on coatings, waxes, sealants and PPF
- Dilutes 1:200 sprayer, 1:50 foam lance, 1:1 to 1:5 drying aid
Dilution
- Exterior : Rinseless&Waterless — 1:200 (1:200) (primary)
- Exterior : Foam — 1:50 (1:50)
- Exterior : Quick Detailer — 1:1~1:5 (1:1-5)
Usage
- Shake the bottle before use.
- Dilute for the chosen method: 1:200 for spray-on, 1:50 in a foam lance, 1:1 to 1:5 as a drying aid.
- Spray the diluted product onto clean, wet paint until well covered.
- Rinse the panel down with pressurized water.
- Pull off the remaining water with the Cleantle Looper drying towel.
- Do not apply to hot panels or under direct sunlight.
핵심 특징
- 물막을 끊어 건조 시간 단축
- 매끄럽고 광택 있는 마감
- 워터 스팟과 줄무늬 발생 감소
- 코팅·왁스·실란트·PPF에 안전
- 스프레이 1:200, 폼랜스 1:50, 드라잉 에이드 1:1~1:5 희석
사용법
- 사용 전에 병을 흔들어 줍니다.
- 용도에 맞춰 희석합니다(스프레이 1:200, 폼랜스 1:50, 드라잉 에이드 1:1~1:5).
- 깨끗하고 젖은 도장면에 희석액을 충분히 분사합니다.
- 고압수로 패널을 헹궈냅니다.
- Cleantle 루퍼 드라잉 타올로 남은 물기를 닦아냅니다.
- 뜨거운 패널이나 직사광선 아래에서는 사용하지 마십시오.