InSynchro V41 Supreme Cut Extreme Compound
인싱크로 V41 수프림 컷 익스트림 컴파운드
InSynchro V41 Supreme Cut Extreme Compound is engineered for heavy paint correction tasks. Its adaptive abrasives quickly remove deep scratches, swirls, oxidation, and water spots, leaving a smooth, uniform paint surface.
인싱크로 V41 수프림 컷 익스트림 컴파운드는 강도 높은 도장면 보정 작업을 위해 설계된 컴파운드입니다. 적응형 연마제가 깊은 스크래치, 스월, 산화, 워터 스팟을 빠르게 제거해 매끄럽고 균일한 도장면을 만듭니다.
- Brand
- Chemical Guys
- Categories
- Exterior : Polishes
- pH
- neutral (8)
Key features
- Quickly removes deep scratches, swirls, oxidation, and water spots
- Adaptive micro-abrasives refine the surface for a uniform finish after correction
- Strong correction results in fewer passes with machine polishers
Usage
- Shake well. Apply 4 to 5 drops to the desired pad. Prime the pad with pad conditioner and dab product evenly across a 2’x2’ section.
- DA/Random Orbital: With the pad touching the paint, start at speed 1 and spread the product. Increase to speed 5-6 and work the area in 2-3 passes with moderate pressure until the product becomes clear. Follow with a light-pressure finishing pass. Remove residue with a clean microfiber towel.
- Rotary: Hold the pad off the surface, set between 1,000 and 1,500 RPM, then apply the pad to the paint and spread the product. Using only the weight of the machine, work each area in 3-4 passes until the compound becomes clear. For the final pass, adjust to 1,200-1,800 RPM until optical clarity is achieved. Remove residue with a clean microfiber towel.
- For a more thorough correction, follow with InSynchro V43 Precision Cut Compound, then finish with InSynchro V45 Supreme Finish Polish.
핵심 특징
- 깊은 스크래치, 스월, 산화, 워터 스팟을 빠르게 제거
- 적응형 마이크로 연마제로 보정 후 표면을 균일하게 정리
- 머신 폴리셔로 적은 패스 횟수에 강력한 보정 결과
사용법
- 충분히 흔듭니다. 원하는 패드에 4~5방울을 도포하고 패드 컨디셔너로 준비합니다. 2x2피트 구역에 고르게 찍어 바릅니다.
- DA/랜덤 오비탈: 패드를 도장면에 대고 1단으로 시작해 제품을 펴 바릅니다. 5~6단으로 올려 적당한 압력으로 2~3패스 작업해 제품이 투명해지면 마칩니다. 가벼운 압력으로 마무리 패스를 하고 극세사 타월로 잔여물을 닦아냅니다.
- 로터리: 패드를 표면에서 떼고 1,000~1,500 RPM으로 설정한 후 도장면에 패드를 대고 제품을 펴 바릅니다. 기계 무게만으로 구역당 3~4패스 작업해 컴파운드가 투명해지면 마칩니다. 마지막 패스는 1,200~1,800 RPM으로 광학적 선명도가 달성될 때까지 작업합니다. 극세사 타월로 잔여물을 닦아냅니다.
- 더욱 철저한 보정을 원한다면 InSynchro V43 프리시전 컷 컴파운드에 이어 InSynchro V45 수프림 피니시 폴리시로 마무리합니다.