Chem-X Stars + Stripes Dilution Ratios & User Guide

Chem-X Stars + Stripes dilution ratio and pH specification chart

스타스 앤 스트라이프스

Chem-X Stars + Stripes — Exterior : Foam, base dilution 1:4. At 1:4, mix about 250 ml of Chem-X Stars + Stripes per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/chem-x/stars-plus-stripes

Chem-X 스타스 앤 스트라이프스 — Exterior : Foam, 기본 희석 1:4. 1:4 기준 물 1L당 Chem-X 스타스 앤 스트라이프스 약 250ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/chem-x/stars-plus-stripes

Stars + Stripes is a two-step touchless foam wash system pairing an acid pre-wash (Stars) with an alkaline detergent (Stripes) applied in sequence. When the two formulas react on the vehicle surface, the resulting pH shock breaks the static bond between grime and the surface, enabling a high-pressure rinse to remove more contamination than any single-soap approach. The system cuts wash time by up to 80% compared to a traditional mitt wash and produces neutral pH runoff safe for all surfaces.

Stars + Stripes는 산성 전처리제(Stars)와 알칼리성 세정제(Stripes)를 순서대로 도포하는 2단계 비접촉 세차 시스템입니다. 두 제품이 차량 표면에서 반응하면 pH 충격이 오염물과 표면 사이의 결합을 끊어주어 고압 세척 한 번으로 단일 세제 대비 더 많은 오염을 제거합니다. 기존 미트 세차 대비 세차 시간을 최대 80%까지 단축하며, 중성 pH 배수로 모든 표면에 안전합니다.

Brand
Chem-X
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:4
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-12

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:41:4
Exterior : Pre-washing (Pretreatment)1:1001:100

Usage

  1. Apply Stars (acid pre-wash) bottom-up using a foam cannon or injector, coating the entire vehicle; allow 30–60 seconds dwell time without letting it dry.
  2. Without rinsing, apply Stripes (alkaline detergent) over Stars from bottom-up and allow another 30–60 seconds for the acid-alkaline reaction to work.
  3. Pressure wash bottom-up for full coverage, then top-down to flush all loosened grime; hold the nozzle about 12 inches from the surface.

핵심 특징

  • 산성 + 알칼리성 2단계 비접촉 세차 시스템
  • pH 반응으로 오염물-표면 결합 분리
  • 미트 세차 대비 최대 80% 시간 단축
  • 중성 pH 배수로 모든 표면에 안전
  • 고농축 설계로 세정 강도 조절 가능
  • 폼 캐논 및 폼 인젝터 호환
  • 세라믹 코팅 및 광택 금속에 안전

사용법

  1. 폼 캐논이나 인젝터를 사용해 Stars(산성 전처리제)를 아래에서 위로 차량 전체에 도포하고, 건조되지 않도록 30~60초 반응시킵니다.
  2. 헹구지 않고 Stars 위에 Stripes(알칼리성 세정제)를 아래에서 위로 도포한 후, 산-알칼리 반응이 진행되도록 30~60초 더 대기합니다.
  3. 고압 세척기로 아래에서 위로 전체를 세척한 뒤 위에서 아래로 헹궈 오염물을 완전히 제거합니다. 노즐은 표면에서 약 30cm 거리를 유지합니다.

Also known as: chemx, 케미컬엑스, 케미컬x, 켐엑스, Chem-X Stars + Stripes, S+S, Chem-X S+S, 켐엑스 스타스 앤 스트라이프스

한국어로 보기

Sources

Related products

More from Chem-X

More Foam products

Explore more