MTM Hydro PF22 Foam Cannon
MTM 하이드로 PF22 폼 캐논
The MTM Hydro PF22 is a professional-grade foam cannon that attaches to a pressure washer to deliver thick, adjustable foam onto vehicles and other washable surfaces. It features adjustable fan blades, a variable spray pattern, and a chemical injection knob to control foam density, with interchangeable orifices for adapting to low- or high-pressure setups.
MTM 하이드로 PF22는 압력 세척기에 장착하여 차량 및 기타 세척 가능한 표면에 진한 폼을 분사하는 전문용 폼 캐논입니다. 조절 가능한 팬 블레이드, 분사 패턴 조절, 세제 농도 조절 노브로 폼 밀도를 조절하며, 교체 가능한 분사 구멍으로 다양한 수압 환경에 대응합니다.
- Brand
- CarCandy
- Categories
- Tools : Wash Supplies
Key features
- Attaches to pressure washers via included fittings
- Adjustable fan blades and spray pattern (vertical/horizontal)
- Chemical injection knob to control foam output density
- Interchangeable 1.25mm and 1.1mm orifices included
- Operating range: 1,100–4,000 psi, 1.8–5.3 gpm
- Max temperature 140°F
- Two stainless steel replacement filters included
Usage
- Attach the foam cannon to your pressure washer using one of the included fittings.
- Adjust the chemical injection knob to set the desired foam concentration.
- Select the spray pattern (vertical or horizontal) and adjust the fan blades as needed.
- To switch to low-pressure mode, replace the pre-installed 1.25mm orifice with the included 1.1mm orifice.
핵심 특징
- 포함된 피팅을 사용해 압력 세척기에 장착
- 팬 블레이드 및 분사 패턴(수직/수평) 조절 가능
- 폼 출력 밀도 조절용 세제 농도 조절 노브
- 1.25mm 및 1.1mm 교체 가능한 분사 구멍 포함
- 작동 범위: 1,100~4,000 psi, 1.8~5.3 gpm
- 최대 온도 140°F
- 스테인리스 교체 필터 2개 포함
사용법
- 포함된 피팅 중 하나를 사용하여 압력 세척기에 폼 캐논을 연결합니다.
- 세제 농도 조절 노브를 돌려 원하는 폼 농도를 설정합니다.
- 분사 패턴(수직 또는 수평)을 선택하고 필요에 따라 팬 블레이드를 조절합니다.
- 저압 모드로 전환하려면 기본 장착된 1.25mm 분사 구멍을 포함된 1.1mm 분사 구멍으로 교체합니다.