Microfibre Polishing Compound
마이크로파이버 폴리싱 컴파운드
A diminishing-abrasive compound formulated specifically for microfibre pads that cuts and refines in a single step, removing oxidation, swirls and scratches up to roughly 1500 grit. The pad keeps speed under load and the compound clears off the pad quickly with an air line.
마이크로파이버 폴리싱 컴파운드는 마이크로파이버 패드 전용으로 설계된 디미니싱 어브레이시브 컴파운드로, 한 번의 작업에서 절삭과 마무리를 동시에 처리하며 산화와 스월, 약 1500그릿 수준의 기스를 제거합니다. 패드가 부하에서도 속도를 유지하고, 작업 후 에어건만으로 잔여물을 손쉽게 털어 낼 수 있습니다.
- Brand
- Carbon Collective
- Categories
- Exterior : Polishes
Key features
- German diminishing abrasive technology
- Designed specifically for microfibre pads
- Removes oxidation on older paint
- Cuts and refines in a single step
- Removes defects up to 1500 grit
- Easy pad cleaning with an air line
Usage
- Shake well and start with a clean, dirt-free finish.
- Apply 6 dots onto the microfibre pad and massage the polish into the pile.
- Spread the polish across the panel at the slowest machine speed.
- Increase machine speed until the polish starts to turn clear.
- Remove residue with a soft microfibre towel.
- Repeat until the desired finish is achieved.
핵심 특징
- 독일제 디미니싱 어브레이시브 기술
- 마이크로파이버 패드 전용 설계
- 노후 도장의 산화 제거
- 한 단계에 절삭과 마감 동시 처리
- 1500그릿 수준까지 결함 제거
- 에어건으로 패드 손쉽게 청소
사용법
- 잘 흔든 뒤 깨끗한 도장면에서 작업을 시작한다.
- 마이크로파이버 패드에 6방울을 도포한 뒤 결에 잘 펴 바른다.
- 가장 느린 속도로 폴리시를 패널 전체에 펼친다.
- 폴리시가 투명해지기 시작할 때까지 머신 속도를 점차 높인다.
- 부드러운 마이크로파이버로 잔여물을 닦아 낸다.
- 원하는 마감이 나올 때까지 작업을 반복한다.