Verso
베르소
Verso is a highly concentrated all-purpose cleaner formulated to handle the toughest cleaning tasks both inside and outside the vehicle. Its adjustable dilution strength makes it equally effective on heavily soiled engine bays and door shuts as on interior fabrics and plastics, without leaving behind residue or damaging delicate surfaces.
베르소는 차량 내외부의 강력한 오염을 처리하도록 배합된 고농축 다목적 클리너입니다. 희석 비율 조절이 가능해 엔진룸과 도어 이음새의 심한 오염부터 실내 직물과 플라스틱까지 잔여물 없이 효과적으로 세정하며, 섬세한 소재도 손상시키지 않습니다.
- Brand
- Auto Finesse
- Categories
- Exterior : Pre-washing (Pretreatment), Interior : Trim Cleaner, Interior : Fabric Cleaner, Exterior : Tire&Wheel Cleaner
- Primary dilution
- 1:2~1:20
- pH
- alkali (10)
Key features
- Highly concentrated adjustable-strength formula
- Safe on interior fabrics, plastics, and trim
- Cuts through grease, oil, and traffic film
- Engine bay and door shut cleaning
- Safe for wheel arches and tyres
- No residue left behind
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:2~1:20 (1:2-20) (primary)
- Interior : Trim Cleaner — 1:10 (1:10)
- Interior : Fabric Cleaner — 1:7 (1:7)
- Exterior : Tire&Wheel Cleaner — 1:5 (1:5)
Usage
- Choose a dilution ratio appropriate for the task: neat or up to 1:3 for heavy grime and degreasing, 1:5 to 1:10 for general cleaning of plastics and tyres, or up to 1:20 for light interior maintenance.
- For interior surfaces, apply the diluted solution to a microfibre cloth or soft brush and gently agitate, then wipe away with a clean damp cloth and allow to dry.
- For engine bays and door shuts, ensure surfaces are cool, apply Verso, agitate with a detailing brush, then rinse thoroughly or wipe clean.
- For tyres and wheel arches, spray directly onto the surface, agitate with a stiff brush, rinse thoroughly, and repeat if heavily soiled.
- For convertible fabric roofs, dilute to a lighter ratio, apply evenly, agitate with a soft brush, then rinse and allow to dry fully.
핵심 특징
- 고농축 희석 조절 가능 포뮬러
- 실내 직물, 플라스틱, 트림에 안전
- 기름때, 오일, 도로 오염물 제거
- 엔진룸 및 도어 이음새 세정
- 휠 아치 및 타이어에 사용 가능
- 잔여물 없이 깔끔한 마무리
사용법
- 작업에 맞는 희석 비율을 선택합니다: 강한 오염 및 탈지에는 원액~1:3, 플라스틱·타이어 일반 세정에는 1:5~1:10, 실내 가벼운 유지 관리에는 최대 1:20.
- 실내 표면에는 희석한 용액을 마이크로파이버 천이나 부드러운 브러시에 묻혀 가볍게 문지른 후, 깨끗하고 축축한 천으로 닦아내고 자연 건조합니다.
- 엔진룸과 도어 이음새에는 표면이 식었는지 확인한 뒤 베르소를 도포하고, 디테일링 브러시로 문질러 충분히 헹구거나 닦아냅니다.
- 타이어와 휠 아치에는 표면에 직접 분사하고 단단한 브러시로 문지른 후 충분히 헹굽니다. 오염이 심하면 반복합니다.
- 컨버터블 패브릭 루프에는 낮은 농도로 희석하여 고르게 도포하고, 부드러운 브러시로 문지른 후 헹구고 완전히 건조합니다.
Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Verso, AF Verso, 오토 피네스 베르소
한국어로 보기