ObliTARate Tar & Glue Remover
오블리태레이트 타르 & 접착제 제거제
ObliTARate is a solvent-based tar and glue remover that rapidly dissolves stubborn bonded contaminants — including tar spots, adhesive residues, tree sap, and rubber marks — on contact, before any physical agitation is required. It is safe for use on all modern painted, powder-coated, glass, and solvent-resistant hard plastic surfaces, and its free-rinsing formula minimises the risk of marring while extending the service life of detailing clay bars. Caution is required on fresh, uncured paint or SMART repair areas.
오블리태레이트는 타르 얼룩, 접착제 잔여물, 수액, 고무 자국 등 완고하게 붙어 있는 오염물을 물리적 마찰 전에 접촉 즉시 분해하는 용제 기반 타르 및 접착제 제거제입니다. 모든 현대적인 도장, 파우더 코팅, 유리, 용제 내성 하드 플라스틱 표면에 안전하게 사용할 수 있으며, 잘 씻겨 나가는 포뮬라가 흠집 위험을 최소화하고 클레이 바의 수명을 연장합니다. 미경화 신선 도료나 SMART 수리 부위에는 주의가 필요합니다.
- Brand
- Auto Finesse
- Categories
- Exterior : Remover
- Primary dilution
- RTU
Key features
- Solvent-based spirit formula
- Rapidly dissolves tar, glue, adhesive, and rubber marks
- Removes tree sap, traffic cone rash, and wax/sealant residues
- Free-rinsing to minimise marring risk
- Extends clay bar service life
- Safe on modern paint, glass, powder-coat, and hard plastics
- Ready to use — no dilution required
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Wash and rinse the vehicle as normal to remove loose dirt before beginning treatment.
- Working one panel at a time, spray ObliTARate directly onto the affected area and allow 1–2 minutes for the formula to dissolve the contamination.
- Gently wipe the treated area with a microfibre cloth to lift any remaining stubborn residue.
- Rinse the panel thoroughly with a strong stream of water, then repeat on the remaining panels and give the entire vehicle a final rinse.
핵심 특징
- 용제 기반 스피릿 포뮬라
- 타르, 접착제, 본드, 고무 자국 신속 분해
- 수액, 콘 자국, 왁스/실란트 잔여물 제거
- 잘 씻겨 나가는 포뮬라로 흠집 위험 최소화
- 클레이 바 수명 연장
- 현대 도료, 유리, 파우더 코팅, 하드 플라스틱에 안전
- 희석 없이 바로 사용 가능
사용법
- 처리를 시작하기 전에 차량을 평소대로 세차하고 헹궈 이물질을 제거하십시오.
- 한 번에 하나의 패널씩 작업하며, 오블리태레이트를 오염 부위에 직접 분사하고 1~2분간 제품이 오염물을 분해하도록 두십시오.
- 마이크로파이버 천으로 처리 부위를 가볍게 닦아 남은 완고한 잔여물을 제거하십시오.
- 강한 물줄기로 패널을 철저히 헹군 후 나머지 패널에도 동일하게 반복하고 차량 전체를 최종 헹굼하십시오.
Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse ObliTARate Tar & Glue Remover, AF ObliTARate Tar & Glue Remover, ObliTARate, Auto Finesse ObliTARate, AF ObliTARate, 오블리태레이트, 오토 피네스 오블리태레이트, OB500
한국어로 보기