Auto Finesse Fusion Hybrid Car Wax User Guide

Auto Finesse Fusion Hybrid Car Wax dilution ratio and pH specification chart

퓨전 하이브리드 카 왁스

Auto Finesse Fusion Hybrid Car Wax — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/auto-finesse/fusion-hybrid-car-wax

Auto Finesse 퓨전 하이브리드 카 왁스 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/auto-finesse/fusion-hybrid-car-wax

Fusion Hybrid Car Wax combines T1-Grade Brazilian carnauba with advanced synthetic polymers to deliver the warm, deep gloss of a natural show wax alongside the extended durability of a synthetic sealant. Engineered to provide up to 8 months of protection, it resists heat, detergents, and UV damage more effectively than traditional carnauba-only waxes. Its thin-spreading consistency makes application easy, and it buffs off smoothly to reveal a rich, wet-look finish suitable for all paint types.

퓨전 하이브리드 카 왁스는 T1 등급 브라질산 카나우바와 첨단 합성 폴리머를 혼합하여, 내추럴 쇼 왁스의 따뜻하고 깊은 광택과 합성 실런트의 뛰어난 내구성을 동시에 제공합니다. 최대 8개월의 보호력을 제공하도록 설계되었으며, 열, 세정제, 자외선에 대한 저항력이 일반 카나우바 왁스보다 우수합니다. 얇게 펴 바르기 쉬운 농도로 사용이 간편하고, 버핑 후 풍부하고 촉촉한 광택 마감을 완성합니다.

Brand
Auto Finesse
Categories
Exterior : Coating
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-19

Key features

Usage

  1. Ensure the vehicle is clean, decontaminated, and free from bonded surface contamination before applying.
  2. Apply a thin layer using a foam applicator (such as a Waxmate XL) at about a quarter to half a turn in the wax tin, coating the applicator evenly.
  3. Work one panel at a time using small, even, overlapping strokes, applying the wax sparingly.
  4. Once you have finished one panel, move to the next and then buff off the completed panel using a soft microfibre cloth.
  5. Allow at least 3 hours between additional coats and avoid application in direct sunlight or at temperatures below 6°C or above 25°C.

핵심 특징

  • T1 등급 카르나우바와 합성 폴리머 혼합
  • 최대 8개월 보호력
  • 고함량 카르나우바 왁스에 견줄 만한 깊고 따뜻한 광택
  • 열, 세정제, 자외선에 높은 저항력
  • 모든 도장 타입에 적합
  • 도포 및 버핑이 용이

사용법

  1. 도포 전에 차량이 깨끗하고, 오염 물질이 완전히 제거된 상태인지 확인합니다.
  2. 왁스 틴을 약 1/4~1/2 바퀴 돌려 폼 어플리케이터(왁스메이트 XL 등)에 왁스를 고르게 묻힙니다.
  3. 한 번에 하나의 패널씩, 작고 균일하게 겹치는 스트로크로 왁스를 얇게 도포합니다.
  4. 한 패널 도포를 마치면 다음 패널로 이동하고, 완료된 패널은 부드러운 마이크로파이버 타월로 버핑합니다.
  5. 추가 코팅 사이에 최소 3시간을 두고, 직사광선, 6°C 이하 또는 25°C 이상의 온도에서는 작업을 피합니다.

Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Fusion Hybrid Car Wax, AF Fusion Hybrid Car Wax, Fusion, Auto Finesse Fusion, AF Fusion, 오토 피네스 퓨전

한국어로 보기

Sources

Related products

More from Auto Finesse

More Coating products

Explore more