Sheer Cutting Pad
쉬어 컷팅 패드
A high-performance wool cutting pad designed for large-stroke dual-action polishers, engineered to remove paint defects efficiently while maintaining finish quality and control. Natural wool fibers reach into surface imperfections to level the paint without generating excessive heat. A non-tapered profile provides precise edge control on tight body panels.
대형 스트로크 듀얼 액션 폴리셔용으로 설계된 고성능 울 컷팅 패드로, 도장 결함을 효과적으로 제거하면서 마감 품질과 작업 제어성을 유지합니다. 천연 울 섬유가 표면 결함 속으로 침투해 과도한 열 발생 없이 도장면을 균일하게 다듬습니다. 비테이퍼 형태로 좁은 패널에서도 정밀한 엣지 작업이 가능합니다.
- Brand
- AMMO
- Categories
- Tools : Wash Supplies
Key features
- High-performance natural wool cutting fibers
- Removes scratches, swirl marks, and surface hazing
- Controlled cut with minimal heat buildup
- Non-tapered design for precise edge work on tight panels
- Available in 3-inch, 5-inch, and 6-inch diameters
Usage
- Center the Sheer Cutting Pad on the polisher backing plate and place face-up on a flat surface.
- Prime the pad by applying X-Foliate in 3 to 4 concentric circles.
- Wearing clean latex gloves, massage the polishing fluid into every fiber of the pad — or spread using a putty knife — so all fibers are saturated.
- Place the primed pad face-down on the paint surface before engaging the polisher trigger.
- Gently pump the pad against the paint to force polishing fluid through all fibers.
- Apply 3 small additional dots of polishing fluid and work one 2×2 foot section at a time at machine speed 2.5–3.
- Blow out or wipe the pad with a microfiber towel after each panel, then reapply product in an X pattern before moving to the next section.
핵심 특징
- 고성능 천연 울 컷팅 섬유
- 스크래치, 미세 소용돌이 흠집, 표면 흐림 제거
- 열 발생을 최소화한 제어된 컷팅
- 좁은 패널 엣지 작업에 유리한 비테이퍼 설계
- 3인치, 5인치, 6인치 직경으로 제공
사용법
- 쉬어 컷팅 패드를 배킹 플레이트 중앙에 맞추고, 패드 면이 위를 향하도록 평평한 면에 놓으세요.
- X-Foliate를 동심원 3~4개 패턴으로 패드에 도포하여 프라이밍하세요.
- 깨끗한 라텍스 장갑을 끼고 광택 유액을 패드 섬유 전체에 고르게 마사지하거나 퍼티 나이프로 펴 발라 모든 섬유를 충분히 적시세요.
- 프라이밍된 패드 면이 도장면에 닿도록 놓은 뒤 폴리셔 트리거를 당기세요.
- 패드를 도장면에 가볍게 눌렀다 뗐다 하며 광택 유액이 섬유 전체에 스며들도록 하세요.
- 광택 유액 3점을 추가로 도포하고, 기계 속도 2.5~3으로 60×60cm 구획씩 작업하세요.
- 각 패널 작업 후 마이크로파이버 타월로 패드를 닦거나 블로우아웃하고, X자 패턴으로 제품을 다시 도포한 뒤 다음 구획으로 이동하세요.
Also known as: 아모, AMMO Sheer Cutting Pad, AMMO NYC Sheer Cutting Pad, 아모 쉬어 컷팅 패드
한국어로 보기