Hydrate
하이드레이트
Hydrate is a high-viscosity drying aid designed to act as a lubricating barrier between a microfiber towel and freshly washed paint, dramatically reducing the friction that causes swirl marks and micro-scratches during the drying stage. Applied to a damp towel or sprayed directly onto wet paint, it allows the towel to glide smoothly across the surface while simultaneously removing water and leaving behind a light protective layer. It is compatible with all painted surfaces, glass, trim, and coated vehicles.
하이드레이트는 마이크로파이버 타월과 방금 세차한 도장면 사이에서 윤활 보호막 역할을 하는 고점도 건조 보조제로, 건조 과정에서 발생하는 미세 스크래치와 소용돌이 흠집의 원인인 마찰을 크게 줄여줍니다. 촉촉한 타월에 도포하거나 젖은 도장면에 직접 분사하면 타월이 표면을 부드럽게 미끄러지며 물을 제거하는 동시에 가벼운 보호막을 남깁니다. 도장면, 유리, 트림, 코팅 차량 모두에 호환됩니다.
- Brand
- AMMO
- Categories
- Exterior : Drying Aid
- Primary dilution
- RTU
Key features
- High-viscosity lubricant minimizes drying-induced scratches and swirl marks
- Creates protective barrier between towel and paint
- Leaves a light wax-like protection after drying
- Reduces water spots and streaks
- Safe on paint, glass, trim, and coated surfaces
- Blueberry scent
Dilution
- Exterior : Drying Aid — RTU (1:0) (primary)
Usage
- Use on wet or damp paint after a foam wash or rinseless wash.
- Shake the bottle thoroughly, then spray onto a damp microfiber towel or directly onto the paint surface.
- Wipe the paint in straight lines, working from top to bottom.
- Wring out the towel to remove collected water, then continue the process on remaining sections.
핵심 특징
- 고점도 윤활 성분으로 건조 시 발생하는 미세 스크래치 및 소용돌이 흠집 최소화
- 타월과 도장면 사이에 보호 윤활막 형성
- 건조 후 가벼운 왁스형 보호층 잔류
- 물자국 및 얼룩 감소
- 도장면, 유리, 트림, 코팅 표면에 안전
- 블루베리 향
사용법
- 폼 세차 또는 무헹굼 세차 후 젖은 도장면에 사용합니다.
- 병을 충분히 흔든 후 촉촉한 마이크로파이버 타월에 분사하거나 도장면에 직접 뿌립니다.
- 도장면을 위에서 아래 방향으로 직선으로 닦아냅니다.
- 타월을 짜서 물을 제거한 후 나머지 구간도 동일하게 작업합니다.
Also known as: 아모, AMMO Hydrate, AMMO NYC Hydrate, 아모 하이드레이트, AMMO Hydrate Paint Moisturizer, Hydrate Paint Moisturizer
한국어로 보기