Alchimy7 P7 Dilution Ratios & User Guide

Alchimy7 P7 dilution ratio and pH specification chart

Alchimy7 P7 — Exterior : Tire&Wheel Cleaner, base dilution 1:2~1:49. At 1:2, mix about 500 ml of Alchimy7 P7 per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/alchimy7/p7

Alchimy7 P7 — Exterior : Tire&Wheel Cleaner, 기본 희석 1:2~1:49. 1:2 기준 물 1L당 Alchimy7 P7 약 500ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/alchimy7/p7

P7 is a highly concentrated wheel cleaner that dissolves and removes brake dust, grease, oil, tar and road film while leaving an attractive finish. It contains corrosion inhibitors, restores the original shine and appearance of wheels, and is biodegradable.

P7은 고농축 휠 클리너로 브레이크 분진, 그리스, 오일, 타르, 노면 필름을 녹여 제거하면서도 깔끔한 마감을 남깁니다. 부식 방지 성분을 함유하고 있으며 휠 본연의 광택과 외관을 되살리고, 생분해성 소재입니다.

Brand
Alchimy7
Categories
Exterior : Tire&Wheel Cleaner
Primary dilution
1:2~1:49
Last updated
2026-07-08

Key features

Dilution

UseDilutionRatio
Exterior : Tire&Wheel Cleaner (primary)1:2~1:491:2-49

Usage

  1. Use only on painted, varnished wheels or plastic hubcaps; test on a small hidden area first if unsure.
  2. Dilute with water according to the desired cleaning strength.
  3. Spray over the entire wheel.
  4. Let it dwell for about 1 minute.
  5. Scrub grimy areas with a brush.
  6. Rinse thoroughly with clean water or a pressure washer, repeating if necessary.

핵심 특징

  • 고농축 포뮬러
  • 브레이크 분진, 그리스, 오일, 타르, 노면 필름 제거
  • 휠 본연의 광택 복원
  • 부식 방지 성분 함유
  • 생분해성

사용법

  1. 도장 처리되거나 광택 코팅된 휠, 플라스틱 휠캡에만 사용하고, 확실하지 않으면 눈에 띄지 않는 부위에 먼저 테스트합니다.
  2. 원하는 세척 강도에 맞게 물로 희석합니다.
  3. 휠 전체에 분사합니다.
  4. 약 1분간 그대로 둡니다.
  5. 오염이 심한 부분은 브러시로 문지릅니다.
  6. 깨끗한 물이나 고압세척기로 충분히 헹구고, 필요하면 반복합니다.

Also known as: 알키미7, 알키미, Alchimy, Alchimy7 P7, P7 Nettoyant Jantes, 알키미7 P7, P-105

한국어로 보기

Sources

Related products

More from Alchimy7

More Tire&Wheel Cleaner products

Explore more