Alchimy7 Ceram'X Wax Dilution Ratios & User Guide

Alchimy7 Ceram'X Wax dilution ratio and pH specification chart

세람엑스

Alchimy7 Ceram'X Wax — Exterior : Coating, base dilution 1:10~1:50. At 1:10, mix about 100 ml of Alchimy7 Ceram'X Wax per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/alchimy7/cire-ceram-x

Alchimy7 세람엑스 — Exterior : Coating, 기본 희석 1:10~1:50. 1:10 기준 물 1L당 Alchimy7 세람엑스 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/alchimy7/cire-ceram-x

Ceram'X is a highly concentrated wax and ceramic (SiO2) hydrocoat/topcoat, made to be diluted through a foam lance, pressure sprayer or standard sprayer. One liter can produce up to 50 liters of ready-to-use hydrocoat, offering major savings over pre-diluted competitor products. It works on wet or dry bodywork and is compatible with soft, hard or even limescale-heavy water, protecting the whole vehicle with gloss, depth and a hydrophobic finish.

세람엑스는 왁스와 세라믹(SiO2) 성분을 고농축한 하이드로코트/탑코트 제품으로, 폼 랜스, 가압 분무기 또는 일반 분무기에 희석해서 사용합니다. 1리터로 최대 50리터의 즉시 사용 가능한 하이드로코트를 만들 수 있어 이미 희석된 경쟁 제품보다 훨씬 경제적입니다. 젖은 차체와 마른 차체 모두에 사용 가능하며 연수, 센물, 석회질이 많은 물에도 잘 맞아 차량 전체에 광택, 깊이감, 발수 효과를 부여합니다.

Brand
Alchimy7
Categories
Exterior : Coating
Primary dilution
1:10~1:50
Last updated
2026-07-10

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)1:10~1:501:10-50

Usage

  1. With a foam lance: pour 15 to 40 ml into the reservoir, top up with water, and spray over the freshly washed vehicle; let it sit for 1 to 2 minutes.
  2. With a pressure sprayer or trigger sprayer: dilute at 2 to 5% with water, mix well, spray over the whole vehicle and let it sit for 1 to 2 minutes.
  3. As a quick wax: dilute at 5 to 10% with water, spray panel by panel on a clean dry vehicle, and spread evenly with a soft microfiber.
  4. Rinse the vehicle thoroughly and dry it for a perfect finish (or wipe with a second microfiber when used as a quick wax).

핵심 특징

  • 왁스와 세라믹(SiO2) 고농축 포뮬러
  • 1리터당 최대 50리터 하이드로코트 제조 가능
  • 폼 랜스, 가압 분무기, 일반 분무기 사용 가능
  • 젖은 차체와 마른 차체 모두 사용 가능
  • 연수·센물·석회질 물 모두 호환
  • 차체·휠·유리·플라스틱 보호
  • 퀵 왁스(QW)로도 사용 가능

사용법

  1. 폼 랜스 사용 시: 탱크에 15~40ml를 넣고 물을 채운 뒤 갓 세차한 차량 전체에 분사하고 1~2분간 그대로 둡니다.
  2. 가압 분무기나 트리거 분무기 사용 시: 물과 2~5% 비율로 희석해 잘 섞은 뒤 차량 전체에 분사하고 1~2분간 그대로 둡니다.
  3. 퀵 왁스로 사용 시: 물과 5~10% 비율로 희석해 깨끗하고 마른 차량에 패널별로 분사한 뒤 부드러운 마이크로파이버로 고르게 폅니다.
  4. 차량을 충분히 헹구고 건조시켜 완벽한 마무리를 만든다 (퀵 왁스로 사용한 경우 새 마이크로파이버로 닦아낸다).

Also known as: 알키미7, 알키미, Alchimy, Cire Ceram'X, Alchimy7 Cire Ceram'X, A7 Cire Ceram'X, 알키미7 세람엑스, E-602

한국어로 보기

Sources

Related products

More from Alchimy7

More Coating products

Explore more