ADBL Pre-Spray Pro Dilution Ratios & User Guide

ADBL Pre-Spray Pro dilution ratio and pH specification chart

프리 스프레이 프로

ADBL Pre-Spray Pro — Interior : Fabric Cleaner, alkali pH, base dilution 1:10~1:60. At 1:10, mix about 100 ml of ADBL Pre-Spray Pro per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/adbl/pre-spray-pro

ADBL 프리 스프레이 프로 — Interior : Fabric Cleaner, pH alkali, 기본 희석 1:10~1:60. 1:10 기준 물 1L당 ADBL 프리 스프레이 프로 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/adbl/pre-spray-pro

Pre-Spray Pro is a highly concentrated pre-spray and stain remover for textile upholstery and carpets. It breaks down deeply set dirt right away and acts faster than traditional cleaning powders. The high concentration keeps usage efficient.

프리 스프레이 프로는 직물 내장재와 카펫을 위한 고농축 프리 스프레이 겸 얼룩 제거제입니다. 깊이 박힌 오염물을 바로 분해하며 기존 세정 분말보다 빠르게 작용합니다. 고농축 제형이라 경제적으로 사용할 수 있습니다.

Brand
ADBL
Categories
Interior : Fabric Cleaner
Primary dilution
1:10~1:60
pH
alkali (10)
Last updated
2026-07-06

Key features

Dilution

UseDilutionRatio
Interior : Fabric Cleaner (primary)1:10~1:601:10-60

Usage

  1. Vacuum the fabric or carpet thoroughly first.
  2. Mix the working solution with warm water around 40C at the right dilution.
  3. Spray the solution evenly over the material.
  4. Agitate the area with a soft brush.
  5. Rinse loosened dirt and residue with an extraction vacuum using lukewarm water or ADBL Textile Rinse solution.
  6. For stubborn soiling repeat steps 2 to 5 or raise the concentration; keep contact time around 5 minutes and do not let it dry on the fabric.
  7. Always run a color stability test before full application.

핵심 특징

  • 직물 및 카펫용 고농축 제형
  • 깊이 박힌 오염물을 바로 분해
  • 효과적인 얼룩 제거
  • 세정 분말보다 빠른 작용
  • 오염 정도별 유연한 희석

사용법

  1. 먼저 직물이나 카펫을 진공청소기로 충분히 흡입합니다.
  2. 약 40도의 따뜻한 물에 적절한 비율로 작업 용액을 희석합니다.
  3. 용액을 소재 표면에 고르게 스프레이합니다.
  4. 부드러운 브러시로 해당 부위를 문지릅니다.
  5. 미지근한 물 또는 ADBL Textile Rinse 용액으로 추출 진공청소기를 사용해 오염물과 잔여물을 헹굽니다.
  6. 심한 오염은 2~5단계를 반복하거나 농도를 높이고, 접촉 시간은 약 5분으로 유지하며 직물에서 마르지 않게 합니다.
  7. 전체 적용 전 반드시 색상 안정성 테스트를 진행합니다.

Also known as: ADBL Pre-Spray Pro, PSP, 에이디비엘 프리 스프레이 프로, ADB000059

한국어로 보기

Sources

Related products

More from ADBL

More Fabric Cleaner products

Explore more