3D Car Care Super Pre-Soak Dilution Ratios & User Guide
슈퍼 프리 소크
3D Car Care Super Pre-Soak — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:40~1:45. At 1:40, mix about 25 ml of 3D Car Care Super Pre-Soak per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/3d-car-care/super-pre-soak
3D Car Care 슈퍼 프리 소크 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:40~1:45. 1:40 기준 물 1L당 3D Car Care 슈퍼 프리 소크 약 25ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/3d-car-care/super-pre-soak
Super Pre-Soak is a high-pH, strongly degreasing spray-on pre-treatment that instantly dissolves, loosens, and emulsifies heavy dirt, traffic film, and oily grime on vehicle exteriors before the main wash. Formulated as a hyper-concentrated Nano Pail product, it is safe on painted surfaces, Prop 65 compliant, biodegradable, and EPA VOC compliant.
슈퍼 프리 소크는 고pH 강력 탈지 사전 처리 스프레이로, 본 세차 전에 차량 외부의 심한 오염물, 교통 필름, 유성 기름때를 즉시 분해하고 유화시킵니다. 나노 페일 초고농축 제품으로 도장면에 안전하며 Prop 65, 생분해 가능, EPA VOC 규정을 준수합니다.
- Brand
- 3D Car Care
- Categories
- Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:40~1:45
- pH
- alkali (12)
- Where to buy
- Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
- Last updated
- 2026-05-26
Key features
- High pH degreasing pre-soak formula
- Dissolves and emulsifies heavy dirt, road film, and oily grime
- Safe on painted surfaces
- Hyper-concentrated Nano Pail format
- Prop 65 compliant and biodegradable
- EPA VOC compliant
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Pre-washing (Pretreatment) (primary) | 1:40~1:45 | 1:40-45 |
Usage
- Dilute at 45:1 for regular strength or 40:1 for extra strength using a dilution system or by hand.
- Spray the diluted solution onto the vehicle exterior surface.
- Allow to dwell for a couple of minutes, then rinse off with a pressure washer.
핵심 특징
- 고pH 탈지 사전 처리 포뮬라
- 심한 오염물, 로드 필름, 유성 기름때 분해 및 유화
- 도장면 안전
- 나노 페일 초고농축 형태
- Prop 65 준수 및 생분해 가능
- EPA VOC 규정 준수
사용법
- 희석 시스템 또는 손으로 일반 강도 45:1, 강력 강도 40:1로 희석합니다.
- 희석된 용액을 차량 외부 표면에 분사합니다.
- 수 분간 방치한 후 고압 세척기로 헹궈냅니다.
Also known as: 3D, 3D Car Care Super Pre-Soak, 3D Super Pre-Soak, SPS, 3D SPS, 3D 슈퍼 프리 소크, 3121G01
Sources
Related products
More from 3D Car Care
- Bug Remover
- GEOTek SD6-1000
- Micro Chenille Wash Mitt w/ Cuff
- AAT 505 Correction Glaze
- Tire Dressing Applicator Small Crescent
- RBL 21mm Random Orbital Polisher
More Pre-washing (Pretreatment) products
- HYDRO Hydro Caraclean
- Koch Chemie Green Star BMP
- Griot's Garage Foaming Surface Prep
- Nanolex Professional PreWash Concentrate
- POLYTOP TRUCK & BUS Intensivreiniger sauer
- NANOSKIN Concentrated Low PH Shampoo