3D Car Care Super Duty Degreaser Dilution Ratios & User Guide

3D Car Care Super Duty Degreaser dilution ratio and pH specification chart

슈퍼 듀티 디그리저

3D Car Care Super Duty Degreaser — Exterior : Degreaser&Dewaxing, alkali pH, base dilution 1:28~1:45. At 1:28, mix about 35.7 ml of 3D Car Care Super Duty Degreaser per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/3d-car-care/super-duty-degreaser

3D Car Care 슈퍼 듀티 디그리저 — Exterior : Degreaser&Dewaxing, pH alkali, 기본 희석 1:28~1:45. 1:28 기준 물 1L당 3D Car Care 슈퍼 듀티 디그리저 약 35.7ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/3d-car-care/super-duty-degreaser

Super Duty Degreaser is an industrial-strength, hyper-concentrated grease emulsifier that breaks down oily grime, grease, and sludge on exterior surfaces and engine components so contaminants can be rinsed or brushed away. The homogeneous concentrate mixes with water at four adjustable strengths and is safe on painted surfaces, VOC compliant, and biodegradable.

슈퍼 듀티 디그리저는 외장 표면 및 엔진 부품의 유성 오염물, 그리스, 슬러지를 분해하는 산업용 강력 초고농축 유지 유화제로, 오염물을 헹궈내거나 브러시로 제거할 수 있습니다. 균질 농축액으로 4가지 강도로 희석 가능하며 도장면에 안전하고 VOC 준수, 생분해 가능합니다.

Brand
3D Car Care
Categories
Exterior : Degreaser&Dewaxing
Primary dilution
1:28~1:45
pH
alkali (12)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Degreaser&Dewaxing (primary)1:28~1:451:28-45

Usage

  1. Dilute to the desired strength: regular (45:1), extra (40:1), super (37:1), or max strength (28:1).
  2. Spray the diluted solution onto the greasy or contaminated surface and let it dwell briefly.
  3. Rinse off with a pressure washer or scrub with a brush as needed, then rinse thoroughly.

핵심 특징

  • 산업용 강력 유지 유화제
  • 균질 초고농축 포뮬라
  • 4가지 희석 강도 지원: 45:1~28:1
  • 도장면 안전
  • 잔여물 및 얼룩 없음
  • VOC 준수, 생분해 가능, Prop 65 준수

사용법

  1. 원하는 강도로 희석합니다: 일반(45:1), 강력(40:1), 슈퍼(37:1), 최대(28:1).
  2. 희석된 용액을 기름기 있거나 오염된 표면에 분사하고 잠시 방치합니다.
  3. 고압 세척기로 헹궈내거나 필요 시 브러시로 문지른 후 완전히 헹굽니다.

Also known as: 3D, 3D Car Care Super Duty Degreaser, 3D Super Duty Degreaser, SDD, 3D SDD, 3D 슈퍼 듀티 디그리저, 1001G01

한국어로 보기

Sources

Related products

More from 3D Car Care

More Degreaser&Dewaxing products

Explore more