Vanguard 탱크300 사용 가이드

Vanguard 탱크300 희석비 pH 스펙 카드

TANK300

탱크300은 충전식 무선 전동 폼 스프레이어로 버튼 한 번으로 압력을 채우고 진한 거품을 분사할 수 있습니다. 압력이 부족하면 자동으로 가압하고 목표 압력에 도달하면 자동으로 멈추며 안전한 사용을 위한 압력 배출 밸브를 갖추고 있습니다. 급수구가 넓어 호스 연결 없이도 물이나 카샴푸를 쉽게 채울 수 있습니다.

브랜드
Vanguard
카테고리
Tools : Wash Supplies
최종 업데이트
2026-07-13

핵심 특징

사용법

  1. 처음 사용하기 전 충전 포트로 완전히 충전하고 표시등이 초록색으로 바뀔 때까지 기다립니다.
  2. 액체 캡을 열기 전 압력 배출 밸브를 눌러 내부 압력을 먼저 빼줍니다.
  3. 용기에 물이나 카샴푸를 채운 뒤 캡을 단단히 잠급니다.
  4. 전원 버튼을 눌러 가압을 시작하며 목표 압력에 도달하면 모터가 자동으로 멈춥니다.
  5. 노즐을 원하는 방향으로 조정한 뒤 분사 버튼을 눌러 거품을 분사합니다.
  6. 3분간 사용하지 않으면 자동으로 전원이 꺼지며 다시 사용하려면 전원 버튼을 눌러줍니다.

TANK300 is a rechargeable, wireless electric foam sprayer that pressurizes and dispenses dense car-wash foam at the push of a button. It auto-pressurizes when needed and stops once target pressure is reached, and includes a pressure-relief valve for safe operation. Its wide filling mouth makes it easy to add water or car shampoo without a hose connection.

Key features

  • Rechargeable wireless design
  • One-button automatic pressurization
  • Auto stop at target pressure
  • Built-in pressure-relief valve
  • Wide fill opening for water and shampoo
  • Includes fan and mist nozzles

Usage

  1. Fully charge the device before first use via the charging port until the indicator light turns green.
  2. Press the pressure-relief valve to release any internal pressure before unscrewing the liquid cap.
  3. Fill the container with water or car shampoo and screw the cap back on tightly.
  4. Press the power button to start pressurizing; the motor stops automatically once target pressure is reached.
  5. Aim the nozzle and press the spray button to dispense foam, adjusting the nozzle for the desired spray pattern.
  6. The device auto-shuts off after three minutes of inactivity; press the power button again to reactivate it.

다른 이름: 뱅가드, Vanguard TANK300, 뱅가드 탱크300, RH-7008

View in English

출처

관련 제품

Vanguard의 다른 제품

같은 카테고리(Wash Supplies) 제품

더 보기