Vanguard 이노가닉 크리스탈 코팅 포 플라스틱 사용 가이드

A high-silicon inorganic crystal coating formulated for plastic trim that cures into a hard, glossy, water-repellent protective layer. It restores color and shine to plastic surfaces and can be paired with matching paint and glass coatings from the same range for a thicker combined film.

Key features

• High inorganic silicon content
• High hardness and gloss
• Strong water repellency
• Restores plastic surface color
• Layerable with matching paint/glass coatings

Usage

1. Wash the car thoroughly.
2. Remove tar and other embedded stains with a stain remover.
3. Use a brake dust remover and clay to strip remaining residue and dust particles.
4. Polish the surface, working from a coarser to a finer compound to prepare it.
5. Wipe down with a degreaser to remove polishing residue before coating.
6. Place a few drops of coating on the applicator sponge and wipe it over roughly a 40x40cm section, first horizontally then vertically.
7. Note the time it takes for the coating to show resistance when wiped with a towel, then use that same timing to coat the rest of the plastic trim.
8. Check the treated areas for any uncured coating residue.
9. Let the vehicle sit indoors for at least 2-3 hours without water contact or touching the surface before returning it.