SWAG 퍼펙트 피니시 V.2 사용 가이드

SWAG 퍼펙트 피니시 V.2 희석비 pH 스펙 카드

PERFECT FINISH V.2

강한 연마 작업 후 남은 홀로그램을 지우고 사용 중 생긴 미세 스크래치 같은 가벼운 결함을 정리하는 초미세 마감용 컴파운드입니다. PROGRESS ABRASIVE와 LOW TEMP 기술로 넓은 입자 범위와 윤활성 높은 페이스트 구조를 결합해 열을 분산시키므로 도장 과열 위험이 줄고 폴리셔 조작이 부드러워집니다. 단단한 도장부터 무른 도장까지 대응하며 메탈릭과 펄 도장의 광택과 색 깊이를 살려 줍니다.

브랜드
SWAG
카테고리
Exterior : Polishes
최종 업데이트
2026-08-01

핵심 특징

사용법

  1. 그늘에서 서늘하고 깨끗한 표면에 작업하며 사용 전 용기를 흔듭니다.
  2. 필요한 연마 수준에 맞는 경도의 피니시 패드에 몇 방울을 덜어 냅니다.
  3. 약 40x40cm 작업 면적에 균일하게 펴 바릅니다.
  4. 로터리는 1500RPM 이하로 유지하며 적당한 압력으로 페이스트가 다 먹을 때까지 연마합니다.
  5. 도장면이 과열되면 식을 때까지 기다립니다.
  6. SWAG FINAL INSPECT로 탈지하고 결함이 남아 있으면 반복합니다.

An ultra-fine finishing polish for removing holograms left by aggressive correction and for erasing the light defects that build up in use, such as fine scratches. The PROGRESS ABRASIVE and LOW TEMP technologies pair a broad abrasive range with a highly lubricated paste body that sheds heat, so the paint is less likely to overheat and the machine glides more easily. It suits hard and soft paints alike and brings out gloss and colour depth on metallic and pearl finishes.

Key features

  • Ultra-fine finishing grade
  • PROGRESS ABRASIVE and LOW TEMP technology
  • Removes holograms and fine scratches
  • Limits heat build-up in the paint
  • Works with rotary and dual-action polishers
  • Preps paint before protective coatings

Usage

  1. Work in the shade on a cool, clean surface and shake the bottle first.
  2. Dose a few drops onto a finishing pad, choosing pad hardness to match the correction needed.
  3. Spread an even layer over a working area of about 40x40 cm.
  4. Machine polish with moderate pressure until the paste is worked in, keeping a rotary below 1500 RPM.
  5. Let the panel cool if the paint becomes too hot.
  6. Degrease the surface with SWAG FINAL INSPECT and repeat if defects remain.

다른 이름: 스웨그, 스웩, Swag PERFECT FINISH V.2, SPPF, Swag SPPF, 스웨그 퍼펙트 피니시 V.2, 스웨그 SPPF

View in English

출처

관련 제품

SWAG의 다른 제품

같은 카테고리(Polishes) 제품

더 보기