SWAG 헤비 컷 V.2 사용 가이드

SWAG 헤비 컷 V.2 희석비 pH 스펙 카드

HEAVY CUT V.2

깊은 스크래치와 부식 자국, 새 배설물이나 벌레 자국까지 강한 도장 결함을 제거하는 헤비 컷 컴파운드입니다. PROGRESS ABRASIVE와 LOW TEMP 기술로 넓은 입자 범위와 윤활성 있는 페이스트를 결합해 열을 빼내므로 패널 과열 위험이 줄어듭니다. 울, 폼, 코듀로이·데님 패드에서 모두 성능을 내며 강한 원스텝 작업이 가능할 만큼 마감도 정리됩니다.

브랜드
SWAG
카테고리
Exterior : Polishes
최종 업데이트
2026-08-01

핵심 특징

사용법

  1. 그늘에서 서늘하고 깨끗한 표면에 작업하며 사용 전 용기를 흔듭니다.
  2. 필요한 연마 수준에 맞춰 커팅 패드에 몇 방울을 덜어 냅니다.
  3. 약 40x40cm 작업 면적에 균일하게 펴 바릅니다.
  4. 로터리는 1500RPM 이하로 유지하며 적당한 압력으로 페이스트가 다 먹을 때까지 연마합니다.
  5. 도장면이 과열되면 식을 때까지 기다립니다.
  6. SWAG FINAL INSPECT로 탈지하고 결함이 남아 있으면 다시 작업합니다.

An aggressive heavy-cut compound for removing severe paint defects including deep scratches, etching and marks left by bird droppings or insects. PROGRESS ABRASIVE and LOW TEMP technologies pair a broad abrasive range with a lubricated paste that carries heat away, reducing the risk of overheating a panel. It performs on wool, foam and corduroy or denim discs while still finishing down cleanly enough for an aggressive one-step.

Key features

  • Heavy abrasive grade
  • PROGRESS ABRASIVE and LOW TEMP technology
  • Removes deep scratches and etching
  • Works on wool, foam and denim pads
  • Limits heat build-up in the paint
  • Supports aggressive one-step correction

Usage

  1. Work in the shade on a cool, clean surface and shake the bottle first.
  2. Dose a few drops onto a cutting pad, matching pad hardness to the correction needed.
  3. Spread an even layer over a working area of about 40x40 cm.
  4. Machine polish with moderate pressure until the paste is worked in, keeping a rotary below 1500 RPM.
  5. Let the panel cool if the paint becomes too hot.
  6. Degrease with SWAG FINAL INSPECT and repeat the pass if defects remain.

다른 이름: 스웨그, 스웩, Swag HEAVY CUT V.2, SPHC, Swag SPHC, 스웨그 헤비 컷 V.2, 스웨그 SPHC

View in English

출처

관련 제품

SWAG의 다른 제품

같은 카테고리(Polishes) 제품

더 보기