미디엄 컷 메탈 폴리시
Medium Cut Metal Polish
영국에서 제조된 미디엄~헤비 컷 메탈 폴리시로, 더 심하게 부식되거나 변색·열화된 고형 금속 표면에 적합합니다. 미세 등급보다 깊은 산화 및 표면 손상을 제거하며, 파인 컷 및 울트라 파인 단계로 순차적으로 정제하기 전 시작 단계로 사용하는 것이 좋습니다. 모든 고형 금속 유형에 사용 가능하며, 얇은 도금 또는 아노다이징 표면에는 사용 불가합니다.
- 브랜드
- Supernatural
- 카테고리
- Exterior : Polishes
핵심 특징
- 부식·변색 금속용 미디엄~헤비 컷 배합
- 영국 제조
- 모든 고형 금속 유형에 적합
- 미세 등급보다 깊은 산화 및 표면 손상 제거
- 파인 컷 및 울트라 파인 단계 전 1단계로 사용 권장
- 얇은 도금 또는 아노다이징 표면에는 사용 불가
사용법
- 표면의 느슨한 오염물, 녹, 이물질을 제거합니다. 필요 시 0000번 철수세미나 습식 연마지를 사용합니다.
- 와플 직조 천이나 테리 면 수건에 폴리시를 묻혀 천이 어두워지고 광택이 나타날 때까지 작업합니다.
- 마이크로스웨이드 천으로 마무리 광택을 내고, 이어서 파인 컷 및 울트라 파인 메탈 폴리시로 단계적으로 정제하여 거울 광택을 완성합니다.
A UK-made medium-to-heavy-cut metal polish formulated for more corroded, tarnished, or degraded solid metal surfaces. It removes deeper oxidation and surface damage than finer grades, and is best used as the starting step before refining down through fine and ultra-fine stages to achieve a mirror-quality result. Suitable for all solid metal types; not for thin plating or anodised surfaces.
Key features
- Medium-to-heavy cut formulation for corroded or tarnished metal
- UK made
- Suitable for all solid metal types
- Removes deeper oxidation and surface damage than finer grades
- Best used as step 1 before fine and ultra-fine polishing stages
- Not for use on thin plating or anodised surfaces
Usage
- Remove loose dirt, rust, or debris from the surface — use 0000 grade wire wool or wet-and-dry paper if needed.
- Apply the polish with a waffle-weave cloth or terry cotton towel and work until the cloth darkens and a shine begins to emerge.
- Buff to a finish with a microsuede cloth, then refine further with Fine Cut and Ultra-Fine Metal Polish to achieve a mirror result.
다른 이름: SN, super natural, 수퍼 내추럴, 슈퍼 내추럴, 수퍼 내츄럴, Supernatural Medium Cut Metal Polish, MCMP, 슈퍼내추럴 미디엄 컷 메탈 폴리시, SNMM100, Supernatural SNMM100, Medium Cut Metal Polish 100ml, 미디엄 컷 메탈 폴리시 100ml, 슈퍼내추럴 미디엄 컷 메탈, Supernatural Medium Metal Polish, 메탈 폴리시 미디엄 컷
View in English