스노우 프로 2.0
Snow Pro 2.0
스퀴드 잉크의 차세대 폼 캐논으로, 1리터 원뿔형 HDPE 병과 360도 조절 노즐, 거품 두께를 조절하는 다이얼을 탑재하고 있습니다. 최대 5,000 PSI를 지원하며 주요 고압 세척기 커넥터 규격과 호환되어 풍성한 거품으로 세차 효율을 높여 줍니다.
- 브랜드
- Squid Ink
- 카테고리
- Tools : Wash Supplies
핵심 특징
- 눈금 표시와 쉬운 주입구가 달린 1L 원뿔형 병
- 수직·수평 팬 패턴 전환을 위한 360도 조절 노즐
- 거품 두께 조절을 위한 폼 및 유량 제어 다이얼
- 스테인리스 피팅 및 엔지니어링 등급 HDPE 병
- 막힘 방지를 위한 필터 흡입관 및 추가 인렛 필터
- 최대 5,000 PSI 내압; 유량 7~20 L/분
사용법
- 먼저 차량을 물로 헹궈 표면의 이물질을 제거합니다.
- 제품 권장 희석 비율에 따라 스노우 폼과 물을 1L 병에 넣습니다.
- 스노우 프로 2.0을 고압 세척기 트리거에 연결하고 원하는 팬 패턴과 폼 설정을 선택합니다.
- 차량 아래쪽부터 위쪽 방향으로 폼을 도포하고 잠시 방치합니다.
- 깨끗한 물로 차량을 충분히 헹굽니다.
The Snow Pro 2.0 is Squid Ink's next-generation snow foam cannon featuring a 1-litre conical HDPE bottle, a 360-degree adjustable nozzle, and a foam/flow control dial for fine-tuning foam thickness. Rated to 5,000 PSI and compatible with most pressure-washer connector types, it delivers dense foam while maximising product economy.
Key features
- 1 L conical bottle with fill markings and easy-fill lid
- 360-degree adjustable nozzle for vertical/horizontal fan patterns
- Foam and flow control dial for adjustable foam thickness
- Stainless steel fittings and engineering-grade HDPE bottle
- Filtered pickup tube and additional inlet filter to reduce clogs
- Rated to 5,000 PSI; flow rate 7–20 L/min
Usage
- Pre-rinse the vehicle to remove loose dirt.
- Add snow foam and water to the 1 L bottle following the product's recommended dilution ratio.
- Attach the Snow Pro 2.0 to your pressure washer trigger and select the desired fan pattern and foam setting.
- Apply foam from the bottom of the vehicle upwards and allow it to dwell briefly.
- Rinse the vehicle thoroughly with clean water.
다른 이름: squid, 스퀴드잉크, 스퀴드, Squid Ink Snow Pro 2.0, SI Snow Pro 2.0, SP2, Squid Ink SP2, 스퀴드 잉크 스노우 프로 2.0
View in English