프로-실
Pro-Seal
프로-실은 폼 랜스를 통해 도포하는 고농축 스노우 폼 실란트로, 도장면에 발수성 보호층을 형성합니다. 1회 시공으로 최대 3개월간 물방울 맺힘과 광택을 유지하며, 일반 도장 패널에 적합하지만 무광, 랩, 패브릭 루프에는 사용할 수 없습니다.
- 브랜드
- Squid Ink
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- 1:4
핵심 특징
- 1회 시공으로 최대 3개월 보호
- 강력한 발수층으로 물방울 맺힘 효과
- 도장 깊이감을 높이는 고광택 마감
- 스노우 폼 랜스로 손쉽게 도포
- 고농축 포뮬라
희석 비율
- Exterior : Foam — 1:4 (1:4) (기본)
사용법
- 잘 흔든 후 차량이 완전히 세정된 상태인지 확인하세요.
- 스노우 폼 랜스에 제품 1: 물 4 비율로 희석하세요 (약 50ml 제품에 200ml 물).
- 깨끗하고 젖은 패널 전체에 고르게 분사하세요 — 두꺼운 폼은 생성되지 않습니다.
- 몇 분간 방치한 후 깨끗한 물로 충분히 헹궈내세요.
- 부드러운 마이크로파이버 타월로 건조하고, 유리와 와이퍼 블레이드는 별도로 유리 클리너로 닦으세요.
Pro-Seal is a concentrated snow foam sealant that applies through a foam lance to lay down a hydrophobic protective layer on painted surfaces. A single application delivers up to three months of water-repelling gloss and protection. It is suitable for all standard painted panels but not recommended for matte finishes, wraps, or fabric roofs.
Key features
- Up to 3 months protection per application
- Strong hydrophobic layer for water beading
- High-gloss finish enhancing paint depth
- Applied via snow foam lance
- Concentrated formula
Usage
- Shake well and ensure the vehicle is thoroughly washed and clean.
- In a snow foam lance, mix 1 part Pro-Seal to 4 parts water (approximately 50 ml product to 200 ml water).
- Apply evenly over clean, wet panels — the product will not produce thick foam.
- Allow to dwell for a few minutes, then rinse thoroughly with clean water.
- Dry with a soft microfibre towel; clean glass and wiper blades separately with a glass cleaner.
다른 이름: squid, 스퀴드잉크, 스퀴드, Squid Ink Pro-Seal, PS, Squid Ink PS, 스퀴드 잉크 프로-실
View in English