헤드라이트 스티머 전용 컵
Headlight Steamer Cup
스파샨 헤드라이트 스티머 3 시스템 전용 컵 액세서리로, 스티머 용제를 담아 헤드라이트 황변 제거에 필요한 증기를 발생시킵니다. 증기 도포용 끝단 어태치먼트가 포함되어 있으며, 별도 판매되는 용제와 함께 사용합니다. 어댑터는 포함되지 않습니다.
- 브랜드
- SPASHAN
- 카테고리
- Tools : Wash Supplies
핵심 특징
- 헤드라이트 스티머 3 시스템 전용 컵
- 증기 도포용 끝단 어태치먼트 포함
- 증기로 헤드라이트 황변 제거 가능
- 남은 용제 재사용 가능
- 사용 후 컵 세척 불필요
사용법
- 헤드라이트 주변을 마스킹 테이프로 보양합니다.
- 거친 사포(400번)부터 시작해 3000번까지 단계적으로 연마하여 크랙과 하드코트 층을 완전히 제거합니다.
- 깨끗한 타올로 표면을 닦고 탈지한 후 완전히 건조시킵니다.
- 전용 컵에 헤드라이트 스티머 3 용제(별매)를 1/4~1/3 정도 채우고 끝단 어태치먼트를 장착한 후 전원을 켭니다.
- 증기가 안정적으로 나오면 헤드라이트 표면에서 2~3cm 거리를 유지하며 렌즈 전체에 고르게 증기를 가합니다.
- 약 3분이면 완전 경화되며, 이후 재연마·세차·우천 주행이 가능합니다.
A dedicated cup accessory for the SPASHAN Headlight Steamer 3 system, designed to hold the steamer solvent and generate restorative vapor for headlight yellowing removal. The cup includes a tip attachment for steam delivery and is used together with the separately sold steamer solvent. No adapter is included.
Key features
- Dedicated cup for Headlight Steamer 3 system
- Includes tip attachment for steam application
- Enables headlight yellowing removal via steam
- Leftover solvent is reusable after each session
- No cup cleaning required after use
Usage
- Protect the area around the headlight with masking tape.
- Sand the headlight surface progressively from coarse grit (400) to fine grit (3000) to fully remove cracks and the existing hard coat.
- Wipe the surface clean with a fresh towel, degrease, and allow to dry completely.
- Fill the dedicated cup to one-quarter to one-third capacity with Headlight Steamer 3 solvent (sold separately), attach the tip, and power on.
- Once steam flows steadily, hold the tip 2–3 cm from the headlight surface and apply steam evenly across the entire lens.
- Allow approximately 3 minutes for full cure; the headlight is then ready for re-polishing, washing, or driving in rain.
다른 이름: 스파샨, SPASHAN Headlight Steamer Cup, ヘッドライトスチーマー専用カップ, 스파샨 헤드라이트 스티머 전용 컵