Sonax 프로피라인 컷맥스 희석비 & 사용 가이드

Sonax 프로피라인 컷맥스 희석비 pH 스펙 카드

PROFILINE CutMax

심하게 노화되거나 깊은 스크래치, 샌딩된 도장면 처리에 특화된 고성능 연마 컴파운드입니다. 회전식 폴리셔와 함께 사용하여 도장 결함과 샌딩 자국을 효과적으로 제거하고 피니시 작업이 가능한 상태로 표면을 준비합니다.

브랜드
Sonax
카테고리
Exterior : Polishes
기본 희석 비율
RTU
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 하드 폼 패드 또는 양모 패드에 제품을 묻혀 낮은 속도와 강한 압력으로 약 30~60초간 폴리싱합니다.
  2. 속도를 높여 연마제가 분해되고 표면이 깨끗해질 때까지 해당 섹션을 계속 작업합니다.
  3. 깨끗한 극세사 타월로 잔여물을 닦아내고 다음 섹션으로 이동하기 전 결과를 확인합니다.

A highly effective abrasive compound for rotary polishing machines, engineered to tackle heavily weathered, deeply scratched, or freshly sanded paint. It cuts through refinishing marks and sanding scratches while leaving a clean, workable surface ready for finishing.

Key features

  • High-cut abrasive for rotary polishers
  • Handles heavily weathered and sanded paint
  • Removes deep scratches and refinishing marks
  • Produces workable surface for finishing

Usage

  1. Apply product to a hard foam pad or lambswool pad and polish at low speed with increased pressure for about 30 to 60 seconds.
  2. Increase the machine speed and continue polishing the section until the abrasives break down and the surface becomes clear.
  3. Remove residue with a clean microfibre cloth and check results before moving to the next section.

다른 이름: 소낙스, SONAX PROFILINE CutMax, PC, SONAX PC, 02463000, 소낙스 컷맥스, 소낙스 PC, 컷맥스 컴파운드, 소낙스 하드컷 폴리시

View in English

출처

관련 제품

Sonax의 다른 제품

같은 카테고리(Polishes) 제품

더 보기