Soft99 H-7 글라스코트 사용 가이드

Soft99 H-7 글라스코트 희석비 pH 스펙 카드

H-7 Glass-coat

도장면, 차량, 선박, 자판기, 간판 등 다양한 외부 표면에 단단한 유리질 보호막을 형성하는 강인한 실리콘 기반 코팅제입니다. 빗물, 염분, 진흙, 자외선, 화학물질 및 마모로부터 보호하며 높은 광택과 뛰어난 내구성을 제공합니다.

브랜드
Soft99
카테고리
Exterior : Coating
최종 업데이트
2026-06-08

핵심 특징

사용법

  1. 처리할 표면의 오염물과 기름기를 완전히 제거하고, 물을 사용한 경우 완전히 건조시킵니다.
  2. 포함된 스펀지의 흰 면에 코팅액을 묻혀 표면에 골고루 빈틈없이 도포합니다. 스펀지는 1회만 사용합니다.
  3. 약 5분간 건조시킨 후 포함된 천으로 가볍게 닦아냅니다.
  4. 코팅 후 건조한 장소에서 12시간 경화시킵니다.

A tough silicon-based coating that forms a hard glass-like protective layer on painted surfaces, vehicles, marine vessels, vending machines, signage, and other exterior equipment. H-7 guards against corrosion from rain, salt, mud, UV radiation, chemicals, and abrasion while delivering a high-gloss finish with excellent durability.

Key features

  • Silicon-based hard glass-like coating layer
  • Protects against rain, salt, UV radiation, chemicals, and abrasion
  • High-gloss finish with excellent durability
  • Suitable for vehicles, marine, vending machines, and industrial surfaces

Usage

  1. Thoroughly clean and degrease the surface to be treated; if water was used, allow it to dry completely.
  2. Apply the liquid to the white side of the included sponge and spread it evenly across the surface with no gaps. Use each sponge only once.
  3. Allow the coating to dry for approximately 5 minutes, then wipe down lightly with the included cloth.
  4. Leave the coated surface to cure in a dry place for 12 hours.

다른 이름: 소프트99, soft, 소프트, Soft99 H-7 Glass-coat, 소프트99 H-7 글라스코트, H7 Glass Coat, H-7

View in English

출처

관련 제품

Soft99의 다른 제품

같은 카테고리(Coating) 제품

더 보기