Soft99 글라코 DX 희석비 & 사용 가이드

Soft99 글라코 DX 희석비 pH 스펙 카드

Glaco DX

글라코 시리즈 중 가장 강력한 발수 유리 코팅제로, S.A.R.F.(강력 접착 + 신속 마감) 기술을 적용해 최대 4개월간 지속되는 초평활 발수층을 형성합니다. 회전 헤드 어플리케이터와 넓은 사각 펠트 패드로 구석까지 균일하게 시공할 수 있으며, 먼지막, 눈, 서리도 효과적으로 차단합니다.

브랜드
Soft99
카테고리
Exterior : Glass Sealant
기본 희석 비율
RTU
최종 업데이트
2026-06-08

핵심 특징

희석 비율

용도희석비율
Exterior : Glass Sealant (기본)RTU1:0

사용법

  1. 유리의 먼지와 오염을 제거하고 완전히 건조한 후 시공을 시작합니다.
  2. 어플리케이터의 캡을 돌려서 분리합니다.
  3. 펠트 헤드를 유리에 누르고 병을 살짝 눌러 액체를 펠트에 배출합니다.
  4. 격자 패턴으로 도포하며, 필요 시 추가로 눌러 액체를 보충하면서 빈 곳 없이 전면을 시공합니다.
  5. 5~10분 건조 후, 물기를 꼭 짠 촉촉한 타월로 닦아냅니다.

The strongest water-repellent glass coating in the Glaco series, featuring S.A.R.F. (Strong Adhesion + Rapid Finish) technology that creates an ultra-smooth surface layer for powerful rain deflection lasting up to 4 months. The swivel-head applicator with a large square felt pad makes even application easier, including in corners, and also repels traffic film, snow, and frost.

Key features

  • S.A.R.F. technology for ultra-smooth, durable water-repellent layer
  • Up to 4 months of durability
  • Swivel-head applicator with large square felt pad
  • Repels rain, traffic film, snow, and frost
  • Strongest repellency in the Glaco lineup

Usage

  1. Wash the glass to remove dirt and dust, then dry completely before starting.
  2. Unscrew and remove the cap from the applicator.
  3. Press the felt head onto the glass and gently squeeze to release liquid into the felt.
  4. Apply in a criss-cross pattern, squeezing to add more liquid as needed, covering the entire surface with no gaps.
  5. Allow to dry for 5–10 minutes, then wipe off with a tightly wrung damp towel.

다른 이름: 소프트99, soft, 소프트, Soft99 Glaco DX, 소프트99 글라코 DX

View in English

출처

관련 제품

Soft99의 다른 제품

같은 카테고리(Glass Sealant) 제품

더 보기