Soft99 클로스 배리어 패브릭 시트 코트 희석비 & 사용 가이드

Soft99 클로스 배리어 패브릭 시트 코트 희석비 pH 스펙 카드

Cloth Barrier Fabric Seat Coat

퓨소 불소 폴리머 기반의 패브릭 보호 스프레이로, 자동차 시트 및 내장재 위에 눈에 보이지 않는 발수·방유 보호막을 형성합니다. 1회 시공으로 일반 사용 기준 약 3개월간 효과가 지속됩니다.

브랜드
Soft99
카테고리
Interior : Fabric Sealants
기본 희석 비율
RTU
pH
acid (4)
최종 업데이트
2026-06-21

핵심 특징

희석 비율

용도희석비율
Interior : Fabric Sealants (기본)RTU1:0

사용법

  1. 사용 전 패브릭이 깨끗하고 건조한지 확인하세요. 실내 온도가 10°C 미만이면 먼저 히터로 차 내부를 따뜻하게 하세요.
  2. 용기를 충분히 흔든 후 노즐을 열림 위치로 돌리세요.
  3. 약 20cm 거리에서 패브릭 전체에 고르게 분사하고(시트 1개당 12~15회), 동봉된 스펀지로 고르게 펴 바르세요.
  4. 완전히 건조될 때까지 기다리세요 — 여름에는 약 2시간, 겨울에는 약 4시간이 필요하며, 필요 시 헤어드라이어 약한 열로 건조를 보조할 수 있습니다.

A Fusso fluoropolymer-based fabric protection spray that creates an invisible water- and oil-repellent barrier over car seats and upholstery. One application remains effective for approximately three months under normal use.

Key features

  • Fusso fluoropolymer fabric protection
  • Repels water and oil
  • Protection lasts up to 3 months
  • Suitable for fabric seats, child seats, and convertible soft tops
  • Flexible coating stays effective through normal use

Usage

  1. Ensure the fabric is clean and dry before use; if the interior temperature is below 10°C, warm it with the car heater first.
  2. Shake the bottle well and turn the nozzle to the open position.
  3. Spray evenly over the entire fabric surface from about 20 cm away (12–15 sprays per seat), then spread with the included sponge.
  4. Allow to dry completely — about 2 hours in summer, 4 hours in winter; use a hairdryer on low heat to speed drying if needed.

다른 이름: 소프트99, soft, 소프트, Soft99 Cloth Barrier Fabric Seat Coat, 소프트99 클로스 배리어 패브릭 시트 코트

View in English

출처

관련 제품

Soft99의 다른 제품

같은 카테고리(Fabric Sealants) 제품

더 보기