Shine Supply 클래식 컷 희석비 & 사용 가이드

Shine Supply 클래식 컷 희석비 pH 스펙 카드

Classic Cut

중간 수준의 흠집과 결함을 제거하는 감소형 연마 컴파운드입니다. 작업하는 동안 연마 입자가 잘게 부서지며 강한 컷팅에서 고운 마무리로 바뀌어, 보호 작업 직전 상태로 도장을 다듬어 줍니다. 필러, 실리콘, 왁스가 없어 보정 결과가 정직합니다.

브랜드
Shine Supply
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 마이크로파이버 패드에 제품을 바깥쪽과 안쪽 원으로 도포한 뒤 패드 면에 문질러 스며들게 합니다.
  2. 약 60x60cm 면적에 제품을 펴 바른 뒤 DA 폴리셔를 속도 5로 두고 적당한 압력으로 2회 천천히 패스합니다.
  3. 패드를 털거나 닦고 동전 크기 4점을 추가해 압력 없이 같은 면적을 2회 더 패스합니다.
  4. 깨끗한 마이크로파이버 타월로 닦은 뒤 원하는 폴리시로 마무리합니다.
  5. 폼 컷팅 패드는 원 모양 프라이밍을 생략하고 동전 크기 4점으로 패드를 준비합니다.

A diminishing-abrasive compound that removes moderate scratches and defects from paint. As you work it, the abrasives break down and shift from heavy cutting to a finer finish, leaving paint close to ready for a protection step. It contains no fillers, silicone, or wax, so the correction results are honest.

Key features

  • Diminishing-abrasive formula
  • Removes moderate scratches and paint defects
  • No fillers, silicone, or wax
  • Low-dusting
  • Made for dual action polishers
  • No harsh chemical solvents
  • Safe on all paint types and clear coats

Usage

  1. Prime the microfiber pad with an outer and inner ring of product, then rub it into the pad face.
  2. Spread the product over a 2ft by 2ft area before starting, then set the DA polisher to speed 5 and make two slow passes with moderate pressure.
  3. Blow out or clean the pad, add four dime-sized dots, and make two more passes over the same area with no downward pressure.
  4. Wipe with a clean microfiber towel, then follow with your polish of choice.
  5. For foam cutting pads, skip the ring priming and prime with four dime-sized dots instead.

다른 이름: 샤인 서플라이, Shine Supply Classic Cut, Shine Classic Cut, SS Classic Cut, CC, Shine Supply CC, Shine CC, SS CC, 샤인 서플라이 클래식 컷, 샤인 서플라이 CC

View in English

출처

관련 제품

Shine Supply의 다른 제품

같은 카테고리(Polishes) 제품

더 보기