노 럽 에어로졸 코팅
No Rub Aerosol Coating
p and s · PS · 피엔에스 · 피앤애스 · P-S · No Rub · NRC · P&S No Rub · P&S No Rub Aerosol Coating · 노 럽 · 노럽 에어로졸 · 피앤에스 노 럽 · No Rub Polish · 디테일 인 어 캔
노 럽 에어로졸 코팅은 플라스틱, 고무, 비닐에 손쉽게 광택을 입혀주는 스프레이 드레싱입니다. 캔 속의 디테일이라 불릴 만큼 간편하며, 풀 디테일 사이에 에어컨 송풍구, 대시보드, 몰딩, 트림, 범퍼를 빠르게 정리하는 데 유용합니다. 에어로졸 형태로 작업 시간을 줄이고 마무리 속도를 높여줍니다.
- 브랜드
- P&S
- 카테고리
- Interior : Trim Sealants, Exterior : Tire&Wheel Sealant
- 기본 희석 비율
- RTU
핵심 특징
- 플라스틱·고무·비닐용 에어로졸 드레싱
- 최소한의 노력으로 즉각적인 광택
- 에어컨 송풍구·대시·몰딩·트림·범퍼 빠른 터치업
- 작업 시간 절약형 에어로졸
희석 비율
- Interior : Trim Sealants — RTU (1:0) (기본)
사용법
- 사용 전 캔을 잘 흔들어줍니다.
- 표면에서 약 15-20cm 떨어진 거리에서 타이어나 트림에 고르게 분사합니다.
- 10-15분간 자연 건조시키며, 스티어링 휠이나 가속/브레이크/클러치 페달에는 사용하지 마세요.
No Rub Aerosol Coating is a convenient spray dressing for plastic, rubber, and vinyl that delivers an instant shine with minimal effort, sometimes called detail in a can. It is especially handy for quick touch-ups on AC vents, dashboards, moldings, trim, and bumpers between full details. The aerosol format saves labor and speeds up the finishing process.
Key features
- Aerosol dressing for plastic, rubber, vinyl
- Instant shine with minimal effort
- Quick touch-ups on AC vents, dash, moldings, trim, bumpers
- Labor-saving aerosol format
Usage
- Shake the aerosol can well before use.
- Hold the can 6-8 inches away from the surface and spray an even coat over tires or trim.
- Allow the coating to settle and dry for 10-15 minutes; do NOT use on steering wheels or gas/brake/clutch pedals.