OPTI-COAT 옵티멈 젤코트 리스토어러 희석비 & 사용 가이드

OPTI-COAT 옵티멈 젤코트 리스토어러 희석비 pH 스펙 카드

Optimum Gelcoat Restorer

기계 연마 없이 빛바래고 산화된 보트·RV 젤코트를 점진적으로 복원하는 제품입니다. 저모타월로 얇게 여러 층 쌓을수록 광택과 깊이감이 눈에 띄게 회복됩니다.

브랜드
OPTI-COAT
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 원액 Power Clean과 브러시로 느슨한 산화막을 제거한 뒤 표면을 물로 헹구고 완전히 건조시킵니다.
  2. 장갑과 보안경을 착용하고 저모 펄위브 타월로 Gelcoat Restorer를 매우 얇게 원형 겹침 방향으로 도포합니다.
  3. 각 코팅층이 손에 묻어나지 않을 때까지, 약 20-30분간 건조한 후 다음 층을 진행합니다.
  4. 광택과 깊이감을 최대한 살리려면 얇은 코팅을 네다섯 층 쌓는 것이 가장 좋습니다.

Optimum Gelcoat Restorer revives faded and oxidized boat or RV gelcoat surfaces without machine polishing. Successive thin coats applied with a low-nap towel build genuine gloss and depth, progressively restoring the surface toward its original appearance.

Key features

  • Restores boat and RV gelcoat
  • No machine polishing required
  • Multiple thin coats build depth
  • Long-lasting restored gloss
  • Apply with low-nap towel

Usage

  1. Remove loose oxidation with undiluted Optimum Power Clean and a brush or mild abrasive pad, then rinse and dry thoroughly.
  2. Put on gloves and eye protection, then apply a very thin, even layer of Gelcoat Restorer using a low-nap pearl-weave towel in overlapping circular strokes.
  3. Let each coat cure until dry to the touch, around 20-30 minutes, before adding the next layer.
  4. Build up about four to five thin coats for the greatest improvement in gloss and surface depth.

다른 이름: OPTI, 옵티코트, 옵티, opti coat, opticoat, OPTIMUM, optimum, 옵티멈, OPT GCR

View in English

출처

관련 제품

OPTI-COAT의 다른 제품

같은 카테고리(Coating) 제품

더 보기