Nasiol 피피에프가드 희석비 & 사용 가이드

Nasiol 피피에프가드 희석비 pH 스펙 카드

PPFGuard

PPFGuard는 PPF(페인트 보호 필름) 전용으로 설계된 차세대 나노 세라믹 코팅으로, 필름 본래의 자가복원 기능과 무광·새틴 마감을 손상시키지 않으면서 발수 성능을 최대 2년간 복원·연장합니다. 강력한 UV 차단 및 내화학성으로 필름 황변과 색바램을 예방합니다.

브랜드
Nasiol
카테고리
Exterior : Coating, Exterior : PPF Maintenance
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 시공 환경을 23°C, 상대습도 50%에 가깝게 유지하고 그늘진 곳에서 적정 온도의 표면에 시공합니다.
  2. 차량을 깨끗이 세차하고 완전히 건조한 뒤, Nasiol Clean으로 PPF 표면의 먼지와 오염을 제거합니다.
  3. 시공 구역을 눈으로 구분하거나 마스킹 테이프로 나누되, 1 m² 이하 단위로 작업합니다.
  4. 제품을 가볍게 흔든 후, 어플리케이터 블록의 스웨이드 천에 필요한 양을 도포합니다. 사용 후 즉시 뚜껑을 닫습니다.
  5. 가로·세로 방향으로 제품을 표면에 고르게 펴 바릅니다.
  6. 30–45초 이내에 동봉된 마이크로파이버 천으로 잔여물을 닦아냅니다. 원형 동작은 피합니다.
  7. 경화 기간 중 수분, 과도한 먼지, 오염물질을 피합니다. 24시간 후 외부 주차 가능, 48시간 동안 샴푸 세차를 삼갑니다.

PPFGuard is a next-generation nano ceramic coating engineered exclusively for paint protection films, restoring and extending the PPF's hydrophobic performance for up to two years while preserving its self-healing properties and original matte or satin finish. Its powerful UV and chemical resistance helps prevent yellowing and color fading, keeping the film looking newer for longer.

Key features

  • Restores and prolongs PPF hydrophobic performance up to 2 years
  • Preserves self-healing properties of the film
  • Does not interfere with matte or satin PPF finishes
  • Reduces yellowing and aging effects
  • Strong UV and chemical resistance
  • Developed specifically for professional detailers

Usage

  1. Ensure the environment is close to 23°C and 50% relative humidity. Work in a shaded area on a surface that is neither too cold nor too warm.
  2. Wash the vehicle thoroughly and dry it completely; use Nasiol Clean to remove any dust or contamination from the PPF surface.
  3. Visually partition the application area or use masking tape; do not work on sections larger than 1 m² at a time.
  4. Shake the product gently before use. Place the small suede cloth on the block applicator and apply the required amount of product onto the cloth; recap the bottle immediately.
  5. Spread the product across the surface in horizontal and vertical strokes.
  6. Within 30–45 seconds, use the enclosed microfiber cloth to wipe off any excess product; avoid circular swirling motions.
  7. Keep the coated surface away from water, excessive dust, and contaminants throughout the curing period. The vehicle can be taken outdoors after 24 hours; avoid shampoo washing for the first 48 hours.

다른 이름: 나지올, Nasiol PPFGuard, 나시올 피피에프가드

View in English

출처

관련 제품

Nasiol의 다른 제품

같은 카테고리(Coating) 제품

더 보기