McKee's 37 세라믹 코팅 어플리케이터 사용 가이드

McKee's 37 세라믹 코팅 어플리케이터 희석비 pH 스펙 카드

Ceramic Coating Applicator

세라믹 페인트·휠·유리 코팅에 맞춰 설계된 어플리케이터입니다. 클로즈드 셀 유럽산 폼 면이 스트리킹과 하이 스팟을 줄이고, 부드러운 폼이 단단한 그레이 폼 그립과 결합되어 장시간 작업에도 손에서 미끄러지지 않습니다. 미국 제조, 2개입 구성입니다.

브랜드
McKee's 37
카테고리
Tools : Wash Supplies
최종 업데이트
2026-05-26

핵심 특징

사용법

  1. 어플리케이터 폼 면에 세라믹 코팅제를 2~3방울 떨어뜨립니다.
  2. 작은 구역씩 좌우, 상하 방향으로 코팅제를 펴줍니다.
  3. 잔여물이 굳기 전에 즉시 깨끗한 마이크로파이버 타월로 닦아냅니다.
  4. 코팅 작업 후에는 어플리케이터를 폐기하고 재사용하지 않습니다.

Applicator built for ceramic paint, wheel and glass coatings, with a closed-cell European foam face intended to limit streaking and high spots. The soft foam is bonded to a coarse grey foam grip that holds in the hand during long detail sessions. Made in the USA and sold as a 2-pack.

Key features

  • Closed-cell European foam face
  • Helps limit high spots during coating
  • Soft foam bonded to a non-slip grey foam grip
  • Helps reduce coating waste
  • Made in the USA, 2-pack

Usage

  1. Apply 2-3 drops of ceramic coating onto the applicator foam face.
  2. Work in small sections, gliding the applicator side-to-side then up-and-down.
  3. Immediately wipe off any excess with a clean microfiber towel before it cures.
  4. Discard the applicator after the coating job; do not reuse on subsequent applications.

다른 이름: 맥키스, 37, McKee's 37 Ceramic Coating Applicator, MK37 Ceramic Coating Applicator, Coating Applicator, CCA, 맥키스 37 세라믹 코팅 어플리케이터, 맥키스 37 CCA

View in English

출처

관련 제품

McKee's 37의 다른 제품

같은 카테고리(Wash Supplies) 제품

더 보기