Koch Chemie 울트라 폼 희석비 & 사용 가이드

Ultra Foam UF is a mildly alkaline (pH 8.5) snow-foam pre-wash concentrate from Koch-Chemie, sitting between the pH-neutral Gentle Snow Foam and the stronger alkaline Active Foam. It lays down a dense, long-clinging foam carpet that dissolves road film, traffic grime and light dirt during the pre-wash while remaining tolerant of polymer sealants and ceramic coatings. It is designed for foam-lance and SB / self-service wash use, loosening soil so it can be rinsed away before contact washing.

Key features

• Mildly alkaline pH 8.5 — coating- and sealant-safe
• Foam-lance concentration up to max 1% (approx. 1:100); hand/maintenance wash up to 1:300
• Dense, high-cling foam carpet with long dwell time on vertical panels
• Pre-wash / SB (self-service) snow foam that lifts road film and traffic grime before contact washing
• High anionic surfactant content; free of NTA, phosphate and EDTA

Usage

1. Dilute for the method: foam lance at max 1% (about 1:100); hand/maintenance wash up to 1:300. In winter, pre-dilute concentrate 1:5 to 1:10 in warm water for pump performance.
2. Apply the foam to cool, shaded bodywork from the bottom upward, covering the whole vehicle with an even foam carpet.
3. Allow to dwell for a maximum of 5 minutes; never let the foam dry and do not apply in direct sunlight.
4. Rinse off thoroughly with a high-pressure washer before proceeding to the contact wash.