퍼펙트 피니시 실란트
PerfectFinish Sealant
자동차·상용차·모터사이클의 도장면에 오래 유지되는 보호 막을 깔아 주는 스프레이 실란트입니다. 폴리시 & 실링 타월로 손 도포하거나 폴리시 & 실링 폼 패드를 끼운 폴리셔로 작업할 수 있고, 도포 후 24시간 동안은 세차하지 않는 것이 좋습니다.
- 브랜드
- Koch Chemie
- 카테고리
- Exterior : Quick Detailer, Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 스프레이형 실란트
- 손·기계 도포 모두 가능
- 오래 가는 도장 보호
- 도포 후 24시간 세차 금지
희석 비율
- Exterior : Quick Detailer — RTU (1:0) (기본)
사용법
- 오염 정도에 맞춰 사전 세차를 하고 표면을 완전히 말립니다.
- 필요하면 실리콘이 들어가지 않은 폴리시로 도장을 정돈한 뒤 패널 프리퍼레이션 스프레이로 탈지합니다.
- 실란트를 깨끗한 폴리시 & 실링 타월에 분사한 다음 인접 패널을 따라 고르게 펼쳐 바릅니다.
- 마른 폴리시 & 실링 타월로 남은 잔여물을 닦아 내고, 도장면에 직접 분사하지 않습니다.
- 기계 도포 시에는 폴리시 & 실링 폼 패드에 묻혀 이심형 폴리셔로 구역별로 작업합니다.
- 도포 후 24시간 동안은 차량을 다시 세차하지 않도록 합니다.
Spray sealant designed to lay down durable protection across painted vehicle exteriors on cars, commercial vehicles and motorcycles. Can be applied by hand with a Polish & Sealing Towel or by machine on a Polish & Sealing Foam Pad, and the surface should not see another wash for 24 hours after application.
Key features
- Spray-on sealant
- Hand or machine application
- Long-lasting paint protection
- 24-hour wash hold-off
Usage
- Pre-wash the vehicle to suit the soiling level and dry the panels completely before any treatment.
- If the paint needs work, polish with a silicone-free product and degrease with Panel Preparation Spray.
- Spray the sealant onto a clean Polish & Sealing Towel and spread it evenly over connected sections of paint.
- Wipe away leftover product with a separate dry Polish & Sealing Towel and avoid spraying directly onto paint.
- For machine application, dispense onto a Polish & Sealing Foam Pad and work it section by section with an eccentric polisher.
- Keep the vehicle out of the wash bay for 24 hours after the sealant has been laid down.
다른 이름: KCX, koch-chemie, 코흐, 코흐케미, PFS, Koch PFS, KC PFS, 코흐케미 퍼펙트 피니시, PerfectFinish
View in English