Q2R 마린폴리시 스텝 2
Q²R Marinepolish Step 2
기온 · 기온쿼츠 · GYEON QUATZ · gyeon quartz · 기연 · 쿼츠 · Marinepolish Step 2 · Marine Polish Step 2 · Q2R Marinepolish Step 2 · GYEON Marinepolish Step 2 · 기온 마린폴리시 스텝 2 · 마린폴리시 스텝 2 · 피니싱 마린폴리시 · 젤코트 피니시 폴리시 · 요트 피니싱 폴리시 · 마린 마감 폴리시
가벼운 결함과 폴리싱 자국을 제거하며 깨끗하고 정제된 마감을 만들어내는 젤코트 및 요트 페인트용 피니싱 폴리시입니다. 로터리와 오비탈 폴리셔 모두와 호환되며, 실리콘과 필러가 없는 포뮬러로 각 패스 후 일관된 결과와 손쉬운 잔여물 제거를 보장합니다.
- 브랜드
- GYEON
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 시작 전 폴리싱 패드에 소량의 제품을 도포합니다.
- 로터리 또는 오비탈 폴리셔를 사용해 표면 전체를 작업합니다.
- 남아 있는 결함 정도에 따라 가벼운 압력에서 중간 압력으로 조절합니다.
- 각 섹션 작업 후 깨끗한 극세사 타올로 모든 폴리싱 잔여물을 닦아냅니다.
- 필요 시 마무리된 표면에 보호 코팅이나 실란트를 도포합니다.
A finishing polish for gelcoat and yacht paint that removes light defects and polishing marks while producing a clean, refined surface ready for protection. Compatible with both rotary and orbital polishers, its silicone-free and filler-free formula ensures consistent results and straightforward residue removal after each pass.
Key features
- Low dust output
- Silicone-free formula
- Filler-free formula
Usage
- Apply a small amount of product onto the polishing pad before starting.
- Work across the surface using either a rotary or orbital polishing machine.
- Adjust pressure from light to moderate depending on the level of remaining defects.
- Wipe away all polishing residue with a clean microfibre towel after each section.
- Apply a protective coating or sealant over the finished surface if required.