GTECHNIQ 지티원 희석비 & 사용 가이드

GTECHNIQ 지티원 희석비 pH 스펙 카드

GT1

GT1은 도장면·유리·휠·트림을 한 제품으로 시공하는 싱글레이어 세라믹 코팅제입니다. 전용 어플리케이터로 얇고 고르게 편 뒤 반응이 올라오면 닦아내는 방식이라 전문 시설 없이도 시공할 수 있으며, 관리에 따라 약 1년간 미끌림과 물방울 맺힘, 내화학성을 유지합니다. 킷에는 GT1 50ml와 패널 와이프, 마이크로파이버, 어플리케이터 패드가 포함됩니다.

브랜드
GTECHNIQ
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-07-28

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 직사광선을 피하고 주변 온도가 5°C 이상인 곳에 차량을 세웁니다.
  2. 신차라도 전체 탈철·탈지 세차를 마치고 완전히 건조합니다.
  3. 동봉된 장갑을 끼고 MF1 천에 패널 와이프를 분사해 패널마다 얼룩과 잔여물이 남지 않게 닦아냅니다.
  4. 어플리케이터 패드에 GT1을 과하지 않게 고르게 묻힙니다.
  5. 도장면부터 위에서 아래로, 가로 방향 후 세로 방향으로 겹쳐 바른 뒤 유리·트림·휠 순으로 진행합니다.
  6. 코팅이 반응해 분리되기 시작할 때까지 두었다가 깨끗한 마이크로파이버로 닦아냅니다.
  7. 시공 후 7일간 경화시킨 뒤 세차합니다.

GT1 is a true single-layer ceramic coating that covers paint, glass, wheels and trim with one product. It is formulated for a driveway-safe application — spread a thin, even layer with the supplied applicator, let it flash, then buff off — and typically lasts up to a year, holding slickness, water beading and chemical resistance with regular upkeep. The kit ships with 50ml GT1, Panel Wipe, microfibre cloths and an applicator pad.

Key features

  • True single-layer ceramic coating
  • One product for paint, glass, wheels and trim
  • Driveway-safe, easy application
  • Lasts up to about one year
  • Maintains slickness and water beading
  • Chemical resistance against road grime and staining
  • Kit includes Panel Wipe, microfibres and applicator pad

Usage

  1. Park out of direct sunlight with ambient temperature above 5°C (40°F).
  2. Give the car a full decontamination wash and dry it completely, even if new.
  3. Wearing the supplied gloves, spray Panel Wipe onto the MF1 cloth and wipe down each panel until no streaks or residue remain.
  4. Prime the applicator pad evenly with GT1 without overloading it.
  5. Starting with painted panels from the top down, apply in smooth overlapping passes — side to side, then up and down — then move on to glass, trim and wheels.
  6. Let the coating flash until it begins to react and separate, then buff off the residue with a clean microfibre towel.
  7. Allow the coating to cure for 7 days before washing the vehicle.

다른 이름: 지테크닉, G-technique, g techniq, Gtechniq GT1, GT1 Ceramic Coating, GT1 Ceramic Coating Kit, 지테크닉 지티원, GT1 KIT

View in English

출처

관련 제품

GTECHNIQ의 다른 제품

같은 카테고리(Coating) 제품

더 보기