Geist 이지 필러 포드 사용 가이드

Geist 이지 필러 포드 희석비 pH 스펙 카드

Easy Filler Ford

포드 가죽 인테리어의 깊은 긁힘, 균열, 마찰 손상을 수리하기 위한 색상 매칭 가죽 필러입니다. 액체 가죽 결처럼 손상 부위를 채우며, 건조 후 강한 접착력과 우수한 유연성을 발휘합니다. 색상 복원제 도포 전 단계에서 사용하여 자연스럽고 오래 지속되는 수리 결과를 얻을 수 있습니다.

브랜드
Geist
카테고리
Interior : Leather Sealants
pH
neutral (8)
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-06-27

공개 성분

성분CAS역할
triethylamine121-44-8pH 조절제
2-methylisothiazol-3(2H)-one2682-20-4보존제
cute 1, 1,2-benzisothiazol-3(2H)2634-33-5보존제
Reaction mass of CMIT and MIT (3:1)55965-84-9보존제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 가죽 및 비닐의 균열, 깊은 긁힘, 마찰 손상 충전
  • 매끄러운 수리를 위한 액체 가죽 결 질감
  • 건조 후 강한 접착력과 유연성
  • 포드 인테리어 색상에 매칭
  • 스웨이드, 누벅, 벨루어, 극세사 표면에는 사용 불가

사용법

  1. 가이스트 서피스 프렙으로 손상 부위를 세척 및 탈지하고 건조시킨 후 테이프 테스트로 접착력을 확인하세요. 가죽 사포 패드로 원형으로 가볍게 연마하고 먼지를 제거합니다.
  2. 튜브 끝을 손상 부위에 눌러 필러를 주입한 뒤, 손가락이나 평평한 도구로 표면을 고르게 펴고 열을 가하지 않은 채 천천히 건조시키세요.
  3. 추가 연마가 필요한 경우, 건조된 필러를 가이스트 디졸브로 물 연마하세요.
  4. 표면이 매끄러워지면 가이스트 이지 컬러 리스토러를 도포하여 수리 부위의 색상을 복원하세요.

A colour-matched leather filler for repairing deep scratches, cracks, and friction damage on Ford leather interiors. Acting like a liquid leather grain, it fills damaged areas with strong adhesion and excellent flexibility after drying. Used before applying a colour restorer to achieve a seamless, long-lasting repair result.

Key features

  • Fills cracks, deep scratches, and friction damage on leather and vinyl
  • Liquid leather grain texture for seamless repair
  • Strong adhesion and flexibility after drying
  • Colour-matched to Ford interior shades
  • Not suitable for suede, nubuck, velour, or microfibre surfaces

Usage

  1. Degrease and clean the damaged area with Geist Surface Prep, allow to dry, confirm adhesion with a tape test, then lightly sand the surface in a circular motion using a leather sanding pad and remove all dust.
  2. Press the tube tip into the damaged area to apply the filler, then smooth the surface with a finger or flat tool and allow to dry slowly at room temperature without applying heat.
  3. For additional smoothing, wet-sand the dried filler with Geist Dissolve.
  4. Once the surface is smooth, apply Geist Easy Colour Restorer to restore colour to the repaired area.

다른 이름: 가이스트, Geist Easy Filler Ford, 가이스트 이지 필러 포드

View in English

출처

  • Geist 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Geist의 다른 제품

  • Easy Colour Restorer Lexus
  • Easy Filler Aston Martin
  • Plastic Transparent Gloves
  • Easy Filler Mazda
  • Sponges
  • Easy Filler Ferrari

같은 카테고리(Leather Sealants) 제품

  • KiurLab Pro Leather Thermo Plastic Paste
  • Shine group Leather Protection
  • McKee's 37 Vegan Leather Conditioning Sealant
  • Meguiar's Gold Class Leather Conditioner
  • Elite Detailer Leather Creme
  • Nanolex Si3D Leather

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)